DIY / Home

Easy Inexpensive 5 Minute DIY Fabric Trim

01.09.15
The Design Confidential Easy Inexpensive 5 Minute DIY Fabric Trim

I could not be more excited to share this light bulb moment I had with you guys. This project is so very simple and super duper inexpensive which is my favorite kind of project… yours too? Yahoo.

So if you have been with me for a bit you might remember this instagram post and this DIY lighting project. Ya, waiting for a flood, to be sure… I couldn't even show you the bottom of the curtains in the lighting project shot. But just like many of you have commented on these fabulous window treatments over the last year (I have a slight variation in color in my Master Bedroom, seen here, here and here for the win), I loved these curtains so effing much and even though they were about 12 inches shorter than I would have liked, I wasn't willing to give up on them. I hunted online and all over town, but since I found them on clearance at a particular closeout store, the only option was going to be 84 inch panels.

*Quick segue and a little rant…does anyone actually ever need 84″ curtain panels? I mean, I can't think of a single place I have lived in the last 20 years that would have a need for them. It is just so odd to me. Most of us want our curtains to barely dust the floor and hang several inches above the window line, so who lives in a house with portholes for windows? The answer to that, in case you aren't sure… pretty much no one – at least living on land and in this particular country. There may be like 5 of you who have a unique historic building slash living on a boat situation happening, but otherwise no one. So the moral of this story is that 84 inch panels will pretty much never work. Ugh. End rant*

Anyhow, as I was saying, this project equals so easy it's stupid. But it's amazing for how cheap it is, so pretty much not stupid at all – maybe it's stupid like in the phat sense of the word? I think you get my point regardless (I hope?).

Kitchen Nook Curtains for The Design Confidential Easy Inexpensive 5 Minute DIY Fabric Trim

These curtains have come along way from the high water waders they were in that instagram photo I linked to above. They aren't perfect, but soooo much better. In case you are curious how I lengthened them in addition to adding the trim, I undid the top seam and lowered my curtain rods which when combined with the trim gave me nearly 9 additional inches! Now they dust the floor without dragging or puddling, and in a house full of dogs and boys that is a good thing.

So when I was thinking about how to fix these babies, I knew I needed to add trim, but what kind of trim would work on these curtains and not compete with the rug and the pattern on the curtains themselves? I was originally thinking something in the neighborhood of macrame a neutral color like that of twine. Well it turns out that fabric trim of virtually any variety is astronomically expensive! My gawd. Even on sale, it still isn't all that affordable with the amount I would need. I figured for four panels at this size and by trimming out the bottom and the inside edges I would need about 16 yards of trim. Considering the panels cost me a whopping $8 for a pair, I would indeed feel comfortable spending a bit more on trim, but forking over $200 or more three times over (for the curtains in my bedroom and family room was a bit more than I could stomach.

And then I cried an ugly cry in the aisles of Joann's… well almost… because then I stumbled upon the clearance section which was piled to the rafters with every variety of this:

Yarn as Trim for The Design Confidential Easy Inexpensive 5 Minute DIY Fabric Trim

Ya so, you say? Looks like weirdy yarn, you say? Well it just so happens that is precisely what it is and it comes in a million and one versions including the fabulous and slightly macrame looking version I used on my curtains. Woot woot! The prices range from $1 – $5 for a skein like you see above, and each one is around 7 1/2 yards. That means I only needed about 2 and part of a 3rd. You see, when you spread this stuff out, it turns into glorious looking open weave substance that looks an awful lot like fabric trim and it often has cute stuff running down one side. Two you see above have a woven section of metallic thread running along the edge and the other has a mini pom pom edge. *Squeal* My mind immediately saw a million and one ways to use this stuff and I kind of bought most of the yarn on the rack.

I made sure to stock up on fabric glue before I checked out with 4 baskets full of yarn and other miscellaneous stuff. Ya, because this gal don't sew, at least not like a grownup does, so fabric glue is my bff.

Gluing the Trim in Place for The Design Confidential Easy Inexpensive 5 Minute DIY Fabric Trim

So let's get down to business my friends… this is the simple part. Spread out your trim – I mean yarn – and glue the portion that looks like a perfect little hem onto the backside of your curtain panel (or whatever you are applying trim to). Start at the top of the inside edge of one of your panels and leave 1/2 inch overhang of your trim on that top edge. Then run your trim about 1/4 inch in from the actual edge of the curtain, so that the line of glue and your faux trim hem will be quite hidden.

// Tip – keep the glue to a minimum and try to keep it on the surface so it doesn't bleed through to the opposite side, which happens to be the front of your curtain. You can do this by running a thin line of glue and lightly pressing your trim onto the glue just enough that it saturates the hem of your faux trim. Don't press hard or weight it down or the glue will bleed through. Do a few inches at a time and if you have trouble getting it to stick or lay flat, use pins to secure it in place while you move along to the rest of your panel.

Rounding the Corner for The Design Confidential Easy Inexpensive 5 Minute DIY Fabric Trim

When you are ready to turn the corner, simply turn the corner, and then glue down the overlap of the trim hem like you see above. Then continue on your way till you get to the end of your curtain panel. Let your faux trim continue on about 1/2 inch beyond the edge of your curtain panel. This will help ensure it doesn't appear too short. Then simply fold the cut edge of your faux trim over and glue it onto itself. This will give you a finished edge. Now go back to the start of your trim and fold that extra overhang over on itself and glue it down.

That is it, all she wrote… at least for today. Easy peasy, and oh so cheap. This faux fabric trim added a good 3 inches to my panel and it looks so beachy and fab. You can get a glimpse of my trim for the family room here. Hope this helps save one of you a pretty penny one day when you find yourself needing trim!

Design / Home / Shopping / Studio

New Year New Beginnings // A Shared Bath for the Boys

01.08.15
The Design Confidential New Year New Beginnings // A Shared Bath for the Boys and Shower Curtain Basket Towel Starbust Mirror Brass Blue White Shibori

I’m not sure when or even how, but somewhere along the line my tiny baby bird became a much bigger babe and moved right into the glorious age of bath time water sports and other miscellaneous shenanigans. Oh the pride he shows as he helps most of the water out of the bath, oh what an adorable nightmare it is. Naturally, I thought this was a good time to move him into his own bathroom. Of course where there is a new space to be used, there must be style and function in place.

Shower Curtain / Bamboo Bowl / Mirror / Basket / Tank Basket / Bath Towel / Hand Towel Gray

Starburst Mirror Tank Basket Brass Planter Shibori Shower Curtain Tea Towel Hand Towel for The Design Confidential New Year New Beginnings // A Shared Bath for the Boys

I knew Target would have everything I needed and I didn’t leave empty handed. Not even close. I think they should make carts that can attach to each other like a train, just in case you do an impromptu redesign and you don’t plan your cart packing as well as you could have.

Mirror / Basket / Tank Basket / Bamboo Bowl / Bath Towel / Hand Towel Gray / Shower Curtain / Gray Marble Towel

Blue Ceramic French Bulldog Cookie Jar Wooden Sphere Hammered Brass Tray Framed Landscape Photography Feather for The Design Confidential New Year New Beginnings // A Shared Bath for the Boys

There is a connecting bath between Penn’s room and Blake’s room that they will ultimately share. Until now, neither of them have really used this bath much. With the 5 year age difference between them, they have different needs in this space. My biggest babe is now able to do much of his bathing and bedtime routine himself, but the little babe is not and is still a general hazard where many of the bath time tools are concerned. Storing items like q-tips in containers is a must and the French Bulldog Cookie Jar is perfect for my little animal lovers.

Framed Art / French Bulldog Cookie Jar / Wooden Sphere / Hammered Gold Tray

Basket Towel Holder Throw Blanket Navy Moroccan Pillow Teal Arrow Stripe Rug Gray Chunky Rug Woven Bench Brass Planter Shibori Shower Curtain for The Design Confidential New Year New Beginnings // A Shared Bath for the Boys

The floors in this space are tiled so rugs are also an absolute requirement in here, especially with the extra splashing going on these days. There are no towel bars near the actual place where a person might be looking for one, so a basket serves as easy storage with extra towels for those particularly wet and wiggly kiddos of mine.

Arrow Rug Teal / Chunky Rug / Bench / Throw / Pillow / Basket / Wastebasket / Shower Curtain / Hand Towel Gray

Himalayan Salt Lamp Night Light Bamboo Tumbler Toothbrush Holder Framed Landscape Art Bamboo Soap Dispenser and Hand Towel for The Design Confidential New Year New Beginnings // A Shared Bath for the Boys

I found these fabulous kitchen towels to use next to their sinks, and love the pattern and interest they add. A big focus on hand washing is always happening in this house so they each have their own soap dispensers and Penn (the littlest) has a bench that can be moved next to the sink so he can reach. When he isn’t washing hands, the bench can be used by Blake for sitting (shocking I know) so he can remove those tricky bits of clothing that love to stump a 7 year old, like socks!

Gray Marble Towel / Salt Lamp / Bath Towel / Hand Towel Mint / Soap Dispenser / Tumbler / Framed Art

Blue Ceramic French Bulldog Cookie Jar Hammered Metal Tray Brass Wooden Sphere Bamboo Soap Dispenser for The Design Confidential New Year New Beginnings // A Shared Bath for the Boys

With both boys wanting to be big boys so very badly, a new space decorated just for them with their particular needs and wants is pretty exciting.

Wooden Sphere / Hammered Gold Tray / French Bulldog Cookie Jar / Tumbler / Soap Dispenser

This post is sponsored by Target. Shop Home Décor for modern luxury made easy.

Plans

Free DIY Furniture Plans // How to Build a Fretwork Folding Screen

01.07.15
The Design Confidential Free DIY Furniture Plans // How to Build a Fretwork Folding Screen

Our first plan of the new year! Yahoo. I am all about tackling those lingering projects at the moment- there will be no more procrastinating because projects multiply like bunnies around here. Truly, I am completely overwhelmed with all of the ‘stuff’ I have and need to keep on hand for this amazing biz-ness of mine, but I am ready to simplify and focus on only those things I really truly need to complete or better my spaces. If you need a little something to define a space in your home, but don’t want to block light or make your space feel smaller, this is the perfect plan for you. Right now I would like to have two of these to close myself off from my crazy toddler – mama needs a moment of silence to mourn the sweet little baby that he used to be right before he became the most adorable demon seed babe in the whole wide world, eek! Xx… Rayan

As with all of our plans, you are building at your own risk and you should have a firm understanding of building in general before you attempt many of our plans (some are easy as pie and perfect for beginners). With that, go forth, have fun, take lots of pictures and share them in a showcase on the site or on social media with the hashtag #builtTDCtuff and we will share our faves! Be sure to tag @thedesignconfidential on Instagram / FB and @thedesconf on Twitter / Pinterest. If you are a blogger and you post about your build, don’t forget to include a link to your post on your showcase here. Don’t forget… for all of our newer plans, clicking on the images will let them expand to enormous sizes with much greater clarity. The older plans may need updating so please let us know if you need one fixed!

The Design Confidential Free DIY Furniture Plans // How to Build a Fretwork Folding Screen
$100-$150
Dimensions for The Design Confidential Free DIY Furniture Plans // How to Build a Fretwork Folding Screen
  • 11 – 1×2 at 8’
  • 4 – 1×4 at 8’
  • 6 – 1×2 at 22” – Frame Top and Bottom
  • 6 – 1×2 at 67” – Frame Sides
  • 3 – 1×4 at 16-1/4” – First Front Piece
  • 3 – 1×2 at 31-1/2” – Second Front Piece
  • 3 – 1×4 at 31-1/2” – Third Front Piece
  • 3 – 1×2 at 31-1/2” – Fourth Front Piece
  • 3 – 1×4 at 24-1/16” – Fifth Front Piece
  • 3 – 1×4 at 12” – First Back Piece
  • 3 – 1×2 at 31-1/2” – Second Back Piece
  • 3 – 1×4 at 31-1/2” – Third Back Piece
  • 3 – 1×4 at 31-1/2” – Fourth Back Piece
  • 3 – 1×2 at 31-1/2” – Fifth Back Piece
  • 3 – 1×4 at 9-7/8” – Sixth Back Piece

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Cut out the Frame Top, Bottom, and Sides. Set the Kreg jig for 3/4” material and drill pocket holes in the both ends of the Sides. Assemble as shown with glue and 1-1/4” pocket screws.

Cut out the Front Pieces. Set the Kreg jig for 3/4” material and drill pocket holes in the both ends of the Front Pieces. Assemble as shown with glue and 1-1/4” pocket screws. The Front Pieces will be flush with the front side of the Frame. All pieces will be cut at a 45 degree angle.

Cut out the Back Pieces. Set the Kreg jig for 3/4” material and drill pocket holes in the both ends of the Back Pieces. Assemble as shown with glue and 1-1/4” pocket screws. The Back Pieces will be flush with the back side of the Frame. All pieces will be cut at a 45 degree angle. Repeat Steps 1-3 two more times to create a total of three Screens.

Next, let’s place the hinges on one Screen. On this Screen – which will be the middle screen – place three hinges on each outside edge of the Frame as shown. On one side, the hinges will be lined up with the front of the Frame, and on the other side, the hinges will be lined up with the back of the Frame.

Attach all three Screens together, with the hinged Screen in the center. “Fold” the screen into a shape that allows it to stand on its own.

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

// Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you ONLY use 1 image and provide an ADEQUATE link back to the original source and appropriate plan! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential. By accessing or using any part of the web site, you agree to become bound by the terms and conditions of this website as outlined under Terms of Use. If you do not agree to all the terms and conditions of this agreement, then you may not access the Website or use any services. The information contained in this website is for general information purposes only. The information is provided by The Design Confidential.com and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, personal injury or death, or any loss or damage whatsoever arising from loss of information or profits arising out of, or in connection with, the use of this website. I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it. The Design Confidential.com is inspired by but does not replicate exact designs, any similarities between these plans and items sold at specialty retailers is coincidental and not endorsed by or related to any said retailers. // Affiliate links are used for tools and materials. The Design Confidential will earn a small commission for any items purchased using these links. Thank you for your support – every little bit counts!

Design / Home

Home Tour // My Vintage Vixen Family Room Reveal

01.06.15
The Design Confidential Home Tour // My Vintage Vixen Family Room Reveal

It has been many many moons since I gave you this teaser and now I suppose it is high time I finally share my family room overhaul with you, especially since I have already started changing things up (yes ridiculous, I know). There are a few fab DIY projects in this space, a great many budget scores and a lot of gorgeous goods that are vintage and were also extremely kind on the wallet. All told, this room was a bit tricky to pull together given it's size, and without having much in the way of funding to dedicate to this space I had to be creative, to be sure.

I shall stop talking and let you browse. Then we can all dish on the details later… yahoo.

Of course if you would like to check out other spaces I have recently finished, visit my Home Tour page and for some of my recent styling work you can check out my recent work page (it's new and will be getting a makeover soon).

Now where were we…

The Design Confidential Home Tour // My Vintage Vixen Family Room Reveal
The Design Confidential Home Tour // My Vintage Vixen Family Room Reveal
The Design Confidential Home Tour // My Vintage Vixen Family Room Reveal
The Design Confidential Home Tour // My Vintage Vixen Family Room Reveal
The Design Confidential Home Tour // My Vintage Vixen Family Room Reveal

Many of you remember the ever popular DIY removable wallpaper wall of 2013, it looks so very different to me, in this space with all new decor and shows just how far this room has come since we moved in. As a room wrapped in windows that all sit lower than most furniture stands, the layout of this space was quite a task. I think the current arrangement will be around for a while, but I am dying to try a totally new arrangement just for the hell of it. Trying something unexpected is always where I find my happy place in a space.

The Design Confidential Home Tour // My Vintage Vixen Family Room Reveal
The Design Confidential Home Tour // My Vintage Vixen Family Room Reveal
The Design Confidential Home Tour // My Vintage Vixen Family Room Reveal
The Design Confidential Home Tour // My Vintage Vixen Family Room Reveal

I will follow up with a full list of sources and projects for this space this week! There is one in particular that involves an inexpensive version of fabric trim and I can't wait to share it. It's just spectacular and I have now used this little styling secret 3 more times since originally doing it for this space. *Squeal* because seriously specialty trim is crazy stuupid expensive and truly not affordable for most of us, and so we go without… but not anymore – stay tuned for that project!

I hope you like this space as much as I do! It is so very comfortable for my little family and a snap to keep clutter free – crucial for my sanity!

Home / Shopping

Gifted // Under the Tree to Wear for Me

01.06.15
The Design Confidential Holiday Traditions Gifted // Under the Tree to Wear for Me

Happy New Year my friends! You might have noticed I took a few days off and had a bit of a breather from the blog and all the crazy. It seems to be somewhat crucial for me to check out for bit here and there in order to keep my creativity flowing and maintain that level of insanity that this biz seems to demand. This ain't no job for the weary, that is for sure. Are you all adjusting to the fact that it is 2015? So weird, right? Sounds so futuristic. Can you imagine when it's 2020 or 2025, I mean… those are the dates when the movies tell us that robots rule the world and earth is on the verge of total destruction. Maybe we will actually have hover boards and flying cars for personal transportation by then? Not sure if that seems exciting or terrifying, eek!

I want to hear all about your holiday! What did you find under the tree this year? Tools, tech, clothing? All my faves… We had an amazing Christmas and I am so excited to start this year off with a great many new things and some pretty fabulous projects in the works. But first I thought I would share some of my favorite gifts this year.

// Image above from my Holiday shoot for Domino.com / Designer Traditions

The Design Confidential Holiday Traditions Gifted // Clothing and Accessories Under the Tree to Wear for Me

1 // 2 // 3 // 4 // 5 // 6 // 7 // 8 // 9

If you know me in real life, you know that I am casual 99.9% of the time. With small kids in the house and an active and busy lifestyle, I find myself decked out in yoga pants and pullovers more often than not. I guess I finally got smart and figured this out because it prompted me to get out there and find clothes and accessories that suit my barefoot laid back lifestyle well but also look cute without being fussy or uncomfortable, duh. I have obviously been living in a cloud for the last 10 years but there are some crazy cute things in the active wear department. Guess I'm not alone in my yoga pant wearing mindset. The yoga pants and cape hoodies above are absolutely to die for. That bag is a backpack, cross body bag, or tote and is just so fab – it's unisex by the way and comes in a gray version too. Love it. With a 2 year old, I am just now getting back into wearing earrings. I don't like anything over the top unless I am going out, so pretty much never these days, but a casual everyday pair that won't rip my ear if the babe gives it a yank is a great way to ease back into real people world. This perfume is how I am smelling these days. Is it weird to know how I smell? Maybe.

I'm also a runner, now that you might not know even if you know me in real life. I am over the moon about running and I have started to outfit myself with gear that makes this more of a focus in my life. The trail shoes are amazing and the etip gloves let me fiddle with my phone as I jog along which is good because apparently my ADD carries over from design right into music choices. Naturally a pair of earbuds that won't fall out to listen to the first 20 seconds of each song is kind of great too. I have small ears so the wireless headphones don't work for me but these twist lock and stay in, it's wonderous.

If you are part of the yoga pants club for women (or men… I won't discriminate) and you have some casual faves, I am dying to know!

Showcase

Builders Showcase // An Outdoor Party Table with Built In Drink Cooler

01.03.15
Free DIY Furniture Plans from The Design Confidential: Rustic Outdoor Table // Builders Showcase // An Outdoor Party Table with Built In Drink Cooler

This gorgeous party picnic table was sent over to me from Spencer and it makes me wish spring was already here! Doesn't this seem like the ultimate party setup with the built-in cooling trough and of course perfect for watching football… It doesn't get any better than this my friends!

Psst… If you have built from our plans here at The Design Confidential, please post a showcase, send me your photos or share pictures on your social channels and be sure to tag @thdesignconfidential on instagram and facebook or @thedesconf on twitter and pinterest and hashtag with #builtTDCtuff I will be featuring some standout builds here on the site and on social as well! If you want to join the group pinterest board and pin directly to the group for the entire world to see, send me an email with PINTEREST as the subject line and I will send you an invite! I will be going back through our existing showcase posts and adding them in a bit at a time! Xx…Rayan

To Read More About This Build, Visit This Blog Post 

Estimated Cost 

Length of Time 

Modifications 

Lumber Used 

Finishing Technique 

Building the Frame Base for Free DIY Furniture Plans from The Design Confidential: Rustic Outdoor Table // Builders Showcase // An Outdoor Party Table with Built In Drink Cooler
Building the Table Top for Free DIY Furniture Plans from The Design Confidential: Rustic Outdoor Table // Builders Showcase // An Outdoor Party Table with Built In Drink Cooler
Attaching the Base to the Top for Free DIY Furniture Plans from The Design Confidential: Rustic Outdoor Table // Builders Showcase // An Outdoor Party Table with Built In Drink Cooler
Finishing the Top for Free DIY Furniture Plans from The Design Confidential: Rustic Outdoor Table // Builders Showcase // An Outdoor Party Table with Built In Drink Cooler

Plans

Free DIY Furniture Plans // How to Build a Broadway Bar

12.31.14
The Design Confidential Free DIY Furniture Plans // How to Build a Broadway Bar

To honor the changing of the year tonight, I thought a new plan for a fancy new bar setup would be a lovely way to celebrate with you guys on this lovely New Year’s Eve.

The Design Confidential Free DIY Furniture Plans // How to Build a Broadway Bar
$50-$75
The Design Confidential Free DIY Furniture Plans // How to Build a Broadway Bar
  • 1 – 3/4” plywood at 4’x8’
  • 2 – 1×2 at 8’
  • 1 – 7/8” diameter dowel at 8’
  • 2 – 3/4” plywood at 11-3/4”x40”– Top and Bottom Shelves
  • 1 – 3/4” plywood at 11-3/4”x39”– Bar Side
  • 1 – 3/4” plywood at 10-1/4”x39-1/4” – Second Shelf
  • 2 – 1×2 at 39-1/4” – Second Shelf Front and Back
  • 1 – 1” diameter dowel at 14-1/4” – Right Side Top Dowel
  • 1 – 1” diameter dowel at 24-3/4” – Right Side Bottom Dowel
  • 1 – 3/4” plywood at 10-1/4”x19-1/2” – Third Shelf
  • 2 – 1×2 at 19-1/2” – Third Shelf Front and Back
  • 1 – 1” diameter dowel at 14-1/4” – Left Side Top Dowel
  • 1 – 1” diameter dowel at 10-1/2” – Left Side Bottom Dowel
  • 4 – 3/4” plywood at 3/4”x11-3/4” – Spacers
  • 2 – 3/4” plywood at 2-1/2”x11-3/4” – End Slides
  • 2 – 3/4” plywood at 3-3/4”x11-3/4” – Inside Slides

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Cut the pieces for the Top and Bottom Shelves and Bar Side. Set the Kreg jig for 3/4” material and drill pocket holes in each end of the Bar Side. Drill a 1” diameter hole 2-1/2” from each end, centered, on the Top and Bottom Shelves. Assemble as shown with the 1” drilled holes facing the inside and with glue and 1-1/4” pocket screws.

You Can Build This! Easy DIY Plans from The Design Confidential Free DIY Furniture Plans // How to Build A Broadway Bar via @thedesconf Cut the pieces for the Second Shelf and Second Shelf Front and Back. Set the Kreg jig for 3/4” material and drill pocket holes in one bottom end of the Second Shelf. Drill a 1” diameter hole 2-1/2” from the opposite end of the pocket holes, on the top side and centered. Drill a second 1” diameter hole 22-1/4” from the same end, centered, but on the bottom side. Attach the Second Shelf Front and Back to the Second Shelf as shown with glue and 1-1/4” brad nails. Position Right Side Top Dowel and Right Side Bottom Dowel with glue and attach the Second Shelf (with Front and Back pieces) to the Bar Side as shown with glue and 1-1/4” pocket screws. Note: you can paint the dowels with metallic paint before assembly to make them look like metal rods.

Cut the pieces for the Third Shelf and Third Shelf Front and Back. Set the Kreg jig for 3/4” material and drill pocket holes in one bottom end of the Third Shelf. Drill a 1” diameter hole 2-1/2” from the opposite end of the pocket holes, on the both the top side and bottom side, centered. Attach the Third Shelf Front and Back to the Third Shelf as shown with glue and 1-1/4” brad nails. Position the Left Side Top Dowel and Left Side Bottom Dowel with glue and attach the Third Shelf (with Front and Back pieces) to Bar Side as shown with glue and 1-1/4” pocket screws. Note: you can paint the dowels with metallic paint before assembly to make them look like metal rods.

Cut the pieces for the Spacers. Assemble as shown with glue and 1-1/4” brad nails.

Cut the pieces for the Slides. The End Slides will be located flush with the end Spacers and the Inside Slides will be centered on the Spacers. Assemble as shown with glue and 1-1/4” brad nails.

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

// Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you ONLY use 1 image and provide an ADEQUATE link back to the original source and appropriate plan! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential. By accessing or using any part of the web site, you agree to become bound by the terms and conditions of this website as outlined under Terms of Use. If you do not agree to all the terms and conditions of this agreement, then you may not access the Website or use any services. The information contained in this website is for general information purposes only. The information is provided by The Design Confidential.com and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, personal injury or death, or any loss or damage whatsoever arising from loss of information or profits arising out of, or in connection with, the use of this website. I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it. The Design Confidential.com is inspired by but does not replicate exact designs, any similarities between these plans and items sold at specialty retailers is coincidential and not endorsed by or related to any said retailers. // Post May Contain Affiliate Links

Showcase

Builder Showcase // A Mid Century Modern Credenza for Christmas

12.30.14
The Design Confidential Builder Showcase // A Mid Century Modern Credenza for Christmas

I hope you are all enjoying the holiday break! I will be checking in here and there for the next week or so, but I am trying my best to slow down a bit and detach the electronics from my hot little hands. Wish me luck…

It has been a while since we have shared a Builder Showcase and I have a long (crazy long, eek) line of projects to share with you all! This beauty was shared with me on Twitter and made me instantly jealous of the gorgeous gift this special gal would get for Christmas! The wood is stunning and the craftsmanship is just phenomenal.

In Dee’s words: Just finished my wife’s early XMas present! Thanks @thedesconf for the plans! Now to hide those wires…

And I’m sorry but could you just die over the adorable look on that doggie’s face. Equal parts curious and perhaps like he is about to get into some crazy trouble.

Thanks for sharing Dee! We are so insanely in love with your build! Xx… Rayan

If you have completed a build from our plans here at The Design Confidential, we would love to see you post a showcase and share on Instagram, Facebook, Pinterest, or Twitter using the hashtag #BuiltTDCTuff and be sure to tag me with @thedesignconfidential or @thedesconf so I am sure to see it! I will do my best to get your crazy good work published for all of our fellow sawdust chasers to enjoy!

Psst… If you are on Pinterest you can now join me on the TDC Builders Showcase pinterest board and post images of your amazing hard work or drool over the work of others. If you are interested in joining the group board, send me an email to rayanturner (at) gmail (dot) com with PINTEREST as the subject line and your email address and username and I will send you an invitation to join me!

Shopping

6 Sanity Savers // How to Beat the Post Holiday Backlash

12.28.14

I hope you all had a very Merry Christmas and Happy Hanukkah! It has been nice to unexpectedly have a couple of days to just relax and enjoy my family. We have had a few rather unplanned sick days for everyone here at Casa de TDC. But, I am chomping at the bit to de-holiday this place and tackle the excess once and for all. I am one of those neurotic organizing freaks when I get my hands on a space and so I thought I would share a few of my post holiday backlash beating tools.

1 // $15 Indoor / Outdoor Shelving – Yep you heard me correctly… $15 folks and the max weight per shelf is 55 pounds which is almost the same (and in some cases better) as the max load for the much more expensive shelving units. The only drawback to these inexpensive variety is they aren’t very deep, in which case a second unit to attach to the first will fix that problem right up. Wouldn’t these look fabulous in brass?

2 // Baskets – Goodlooking oversized baskets, like this one, this one and this one, in a variety of patterns and shapes is one of my absolute favorite clutter busters. This is especially true where toys are concerned… and pillows, I seem to be drowning in both at any moment of the day and in particular after Santa has paid a visit to these kiddos.

3 // Vacuum + Steam Mop Combo – With virtually an entire first floor filled with ceramic tile, kids and dogs, and nothing short of a revolving door during the holidays (and most of the time) the amount of debris and subsequent cleanup is constant. This is a a major time saver.

4 // Ziploc Bags + Space Bags – From freezer bags to suction powered space bags, these convenient items save me a ton of space and are my easy solution for storing away bedding, seasonal clothing, ornaments, garlands, and other holiday ephemera once the holidays and winter months are behind us. The large ornament boxes would work well for those special breakable decorations, but with kids and dogs I have none of that. All of my shatterproof, snowflake and paper ornaments get divided up by type and put into Ziploc bags and then placed in plastic bins till the next time I am ready to decorate the tree.

5 // Plastic Bins with Latch – Perfect for storing your holiday decor (all those organized bags of ornaments we talked about) and still letting you see what is inside so that next year you don’t have to open every bin to find what you need. The latch mechanism on these seems to be essential for long term use and helps for those of you who like to overfill (like me). The long low bins are perfect for storing giftwrap you don’t use year round and if you are clever with your packing, will typically house gift bags, boxes and ribbon rolls too.

6 // Upright Deep Cleaning Machine with Scotchguard Protector – I have mentioned the children, the dogs, and many holiday visitors in addition to a pretty decent amount of rain this year and so this is an absolute must. I can only keep up with the spot cleaning for so long before it is simply a much better use of my time to pull out the carpet cleaner. Because let’s be real, with the type of messes that happen with young boys and dogs, spot cleaning is relatively useless and frustrating. I am always so happy with how the carpeting looks after it’s professionally cleaned but regular cleanings by professionals are simply not cost effective so having a personal unit to clean with when I need to is critical for my sanity. With scotchguard protector it will last longer than 5 minutes before someone spills wine, tracks mud, or one of the dogs throws up. That makes me a much less frantic mom and one who isn’t cringing at every potential mess one million times a day.

This post is brought to you in collaboration with BISSEL. All content, ideas, and words are my own. Thanks for supporting the sponsors that allow me to create new and special content like this for The Design Confidential, I heart you guys!

Home

Happy Holidays // My Silver Christmas Tree + Unique Easy DIY Ornaments

12.23.14

You got a bit of a peak at my stunning silver tree here, but I thought I would show you a bit more because this tree is just more gorgeous than words. Or gorgeous enough for a lot of words… how about that. This stunner is the 7 foot Tinkerbell Tree from Treetopia and it is the most special tree I have ever seen. It’s funny actually because I debated whether to go with the gold or silver tree. I knew the gold would be beautiful, but since most of my ornaments and accessories in the space this tree would sit are gold, I thought the Silver would be a nice contrast. Also, if you want to know the honest truth, I thought it would be fun to take an otherwise tacky tree made of silver tinsel, and turn it into a chic bit of holiday decor. Tinsel trees are often the thing of children’s holiday decor and the small inexpensive items you lett your kids get for the fun of it. There is nothing I love more than turning a popular notion or mentality about something on it’s head. Unfortunately, that isn’t the way this went. This tree arrived and I set it up, and it was the most gorgeous thing ever. The. End.

It was a total shocker, if I’m honest. It was so pretty in fact, that I almost didn’t even want to clutter it up with ornaments and decorations. Which if you know me in real life may or may not be surprising. I am known for holiday decorating around town, but I am also known for pushing boundaries and doing seemingly oddball things like leaving a tree entirely naked.

But ultimately my true self won out and I decided to decorate this baby with natural and unexpected items like doilies, driftwood, and garlands cut into pieces… and it is glorious.

I put this beauty in a basket and the stand fit perfectly. Snug as a bug in a rug, but not too snug that it will ruin the basket once the festivities are over (in February when I get around to taking down the tree). For this 7 foot tree, it will require a basket that is at least 17- 18 inches in diameter, just in case you would to put yours in a pot as well! I used a shimmery tablecloth as a bit of a tree skirt, even though I put it in a pot, because I like the way presents look with something fancy as their foundation. This is just personal preference and obviously subjective, but if I was not going to use this tree for present stacking, I would not have given it a skirt once I put it in the basket. That might be weird, and would look like you see above.

The Design Confidential Happy Holidays // My Silver Christmas Tree + Unique Easy DIY Ornaments

Aside from the doilies I draped from the boughs, I brought in a natural and textural element to this tree with wooden laser cut tree and snowflake ornaments, that are actually gift tags from Target, paper stars that I made last year, and faux branches from who knows where a great many moons ago. I love to dip into my craft supplies and styling shelves to see what might be pretty gracing the branches of my tree. I try to see things for what they might add to the tree rather than what they are by nature and it helps me keep things interesting. I hung some faux alabaster oval shaped ‘things’ that I found in a large quantity at the thrift store over the summer. I am not entirely sure what they are (maybe one of you knows?) but they are really pretty and have a nice stone like quality to them that adds a bit of something extra special. Aside from a fairly slight amount of white and silver ball ornaments, everything else on the tree is not actually an ornament in real life. The glittery geometric dangley bits are actually a garland cut into short sections and the capiz shell garland is actually dangling tendrils from a capiz shell chandelier I bought a very long time ago and never hung. This year I used 2-3 foot sections and draped them sparingly to function a bit like a garland. Last year you might remember I cut them into 4-6 inch sections and hung them as ornaments.

The Design Confidential Happy Holidays // My Silver Christmas Tree + Unique Easy DIY Ornaments

I kept my gift wrap simple this year since the tree is so fancy and shiny. I did use gold paper and a nice stripe as well as a bit of the marble remnant paper from my DIY Removable Wallpaper Project. I made simple paper tags in lieu of frilly ribbons and over the top drapey tendrils and opted instead for layers of pretty patterns.

Plans

Free DIY Toy Plans // How to Build a Children’s Retro Washer + Dryer

12.21.14
You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build a Retro Washer and Dryer via @thedesconf

If your kiddos love to play house then they will adore having their very own stacking retro washer and dryer to pretend play with! My littlest adores clean up, it is one of my favorite things about him! He just hates a messy space, lol! Let’s see how long that lasts, eh? As with most of our free plans for toys and play, this fun thing is part of our Handmade Holiday series that will be ongoing till the end of time!

As with all of our plans, you are building at your own risk and you should have a firm understanding of building in general before you attempt many of our plans (some are easy as pie and perfect for beginners). With that, go forth, have fun, take lots of pictures and share them in a showcase on the site or on social media with the hashtag #builtTDCtuff and we will share our faves! Be sure to tag @thedesignconfidential on Instagram / FB and @thedesconf on Twitter / Pinterest. If you are a blogger and you post about your build, don’t forget to include a link to your post on your showcase here. Don’t forget… for all of our newer plans, clicking on the images will let them expand to enormous sizes with much greater clarity. The older plans may need updating so please let us know if you need one fixed!

You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build a Retro Washer and Dryer via @thedesconf
$50-$75
You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build a Retro Washer and Dryer via @thedesconf
  • 1 – 3/4” plywood at 4’x8’
  • 1 – 1×3 at 8’
  • 2 – 3/4” plywood at 14”x30-1/4” – Sides
  • 3 – 3/4” plywood at 12-1/2”x16-3/4” – Top, Shelf, and Bottom
  • 1 – 3/4” plywood at 16-3/4”x27-1/4”– Back
  • 1 – 3/4” plywood at 16-3/4”x27-1/4”– Front
  • 1 – 3/4” plywood at – 3”x16-3/4” – Front Bottom Apron
  • 2 – 3/4” plywood at 10”x11-1/2”– Washer and Dryer Doors
  • 2 – Plexiglas at 8” diameter circles – Washer and Dryer Windows
  • 2 – 1×3 at 3-1/2”– Filter and Soap Drawer Stops
  • 2 – 1×3 at 2-1/2”– Filter and Soap Drawer Fronts
  • 4 – 1×3 at 2-1/2”– Filter and Soap Drawer Sides
  • 2 – 1×3 at 2-1/2”– Filter and Soap Drawer Backs
  • 2 – 1×3 at 1-1/2”– Filter and Soap Drawer Bottoms
  • 2 – 1×3 at 2” diameter circles – Washer and Dryer Dials

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Cut the pieces for the Sides, Top, Shelf, and Bottom. Set your Kreg jig for 3/4” material and drill pocket holes in each side of the Top, Bottom, and Shelf. Assemble as shown with glue and 1-1/4” pocket screws. Make sure that all pocket screws face the inside of the Washer/Dryer or toward the ground so that they are less visible when the entire piece is assembled.

Cut the Back piece. With the Kreg jig set for 3/4” material, drill pocket holes, facing the inside of the Washer/Dryer, in each side of the Back. Assemble as shown with glue and 1-1/4” pocket screws.

Cut the piece for the Front with the Door Openings and Drawer Openings. Remember to drill pilot holes slightly larger than your jigsaw blade for these inside cuts. With the Kreg jig set for 3/4” material, drill pocket holes, facing the inside of the Washer/Dryer, in each side of the Front. Assemble with glue and 1-1/4” pocket screws.

Cut the piece for the Front Bottom Apron. With the Kreg jig set for 3/4” material, drill pocket holes, facing the inside of the Washer/Dryer, in each side of the Front Bottom Apron. Assemble with glue and 1-1/4” pocket screws.

Cut the rough pieces for the Washer and Dryer Door. Mark the shape of each door, and cut them out with your jigsaw. Remember to drill pilot holes slightly larger than your jigsaw blade for the inside cuts.

Attach the hinge on the straight side of the Door and position the Washer and Dryer Doors as shown. If desired, attach a knob for easy opening of each Door. Also, positioning a small magnet on the back of each Door and the Front can help keep the Doors closed.

Next, cut your Plexiglas Door Window pieces. These pieces will cover the Washer and Dryer Door openings on the back, and overlap the Door openings by 1/2”. Use your Mirror Screws to secure the Windows into place. Be aware that you are screwing into 3/4” material and that you may have to use a shorter screw size in order to not entirely screw through the wood.

Cut the pieces for the Drawer Stops. Assemble with glue and 1-1/4” brad nails or 1-1/4” wood screws (through the underside of the Shelf or Bottom and through the Side).

Cut the pieces for the Filter and Soap Drawers. Cut a 1/2” diameter circle in the top center of the Drawer Fronts as shown. Since these pieces are so small, you will need to assemble with glue and 1-1/4” brad nails. Place Drawers into Drawer Openings.

For the Washer and Dryer Dials you could easily glue on retro styled kitchen timers. Another option would be to cut out a 2” circle from your 1/2” thick wood. Place the 2” circle as shown on the Front, and drill a hole in the center of this circle. Loosely secure the circle to the Front with a 2” long bolt and appropriately sized nut. This way, those little hands can still turn the dial.

Label the Dryer, Washer, Filter Drawer, and Soap Drawer. Next, paint pieces of the Washer and Dryer with accent colors and put those kids to work doing some laundry!

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

// Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you ONLY use 1 image and provide an ADEQUATE link back to the original source and appropriate plan! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential. By accessing or using any part of the web site, you agree to become bound by the terms and conditions of this website as outlined under Terms of Use. If you do not agree to all the terms and conditions of this agreement, then you may not access the Website or use any services. The information contained in this website is for general information purposes only. The information is provided by The Design Confidential.com and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, personal injury or death, or any loss or damage whatsoever arising from loss of information or profits arising out of, or in connection with, the use of this website. I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it. The Design Confidential.com is inspired by but does not replicate exact designs, any similarities between these plans and items sold at specialty retailers is coincidental and not endorsed by or related to any said retailers. // Affiliate links are used for tools and materials. The Design Confidential will earn a small commission for any items purchased using these links. Thank you for your support – every little bit counts!

DIY / Home

Oh Christmas Tree + Easy DIY Tree Flocking Without The Mess

12.20.14
The Design Confidential Oh Christmas Tree + DIY Tree Flocking Without The Mess

Once upon a time, way back in July of this year, I decorated for Christmas. It would ultimately be one of many times this year I would put on a Holiday show, but it was memorable because I decided to give something a try that had been kicking around in my head for a while. I had absolutely no idea if this would work, and was fully ready to toss out the giant tree if things went south. Luckily, everything worked out beautifully and instead of ruining my old tree, I was able to breath a bit of new life into it and fall in love with it all over again! For those of you who have an expensive faux tree that you are feeling a tad tired of, this project is for you!

MATERIALS //

// One Tired Ass Faux Tree

// 3-4 Cans White Matte or Flat Spray Paint (I love the $.97 – $1.49 cans at Home Depot)

The Design Confidential Oh Christmas Tree + DIY Tree Flocking Without The Mess

This tree is seriously large and in charge. I think it might be 9 feet in height and is about 4 1/2 – 5 feet wide at the base. You can get a bit of perspective for the size of this baby, here in the before shot I took in my courtyard. Huge. These trees aren't cheap and this one isn't small but I have lost a bit of love for it over the years because I have Design ADD, and need a constant flow of new and different. I adore flocked trees, love them actually, but they are such a crazy mess and we can't do real trees in this house, so I haven't been able to have one… ever. I don't want to fok out several hundred dollars for a new tree since this one was pricey enough to warrant using it for the rest of my life and so I decided to get crafty about it.

The Design Confidential Oh Christmas Tree + DIY Tree Flocking Without The Mess
The Design Confidential Oh Christmas Tree + DIY Tree Flocking Without The Mess

So here is the deal – it turns out you can create a flocked look with flat spray paint, but you need to be fairly specific about how and where you spray so that it doesn't simply look like a white tree. You want to spray only the top portion of each bough and you want to spray pretty thoroughly, but you probably want to create a story in your mind as to how and where snow might fall and collect if this were happening in real life. Just like any other spray paint or painted finish, you need to have your story straight before you take to the can.

I found through accidental serendipity that getting spray on your lights actually results in the most beautiful frosted glow later on, so I say save yourself the trouble and don't worry about covering them or avoiding them as you go along. I would however avoid spraying the plugs and outlets. No need to create a fire hazard.

To begin, separate out each section of your tree and try to stand each section upright as best you can. Then, starting on the lowest boughs of each section (usually you can fold the upper boughs of each section up to move them out of the way and let them down one row at a time), you will spray only the top sides of them and you will coat them more thoroughly near the ends of the boughs (with less toward the trunk) since that is how the snow would settle in real life.

The Design Confidential Oh Christmas Tree + DIY Tree Flocking Without The Mess
The Design Confidential Oh Christmas Tree + DIY Tree Flocking Without The Mess

You do want to coat each section and bough fairly well, because otherwise you won't really see the results as much as you might want, but this is a fairly foolproof project and really you can't screw it up too badly if you get spray on the under side of a bough or don't spray more near the ends. It really won't ruin anything, BUT it will indeed be better if you do follow some of these directions. It is more of a matter of good versus great. This turned out so much better than I could have hoped and I'm so smitten with the results. Honestly I stopped using this tree a while back and now I feel like I have renewed my marriage vows with this beauty and I have a serious crush on it all over again. So that is a win win in my book.

The Design Confidential Oh Christmas Tree + DIY Tree Flocking Without The Mess

Let each section dry without putting it back together as it is technically supposed to go, because you run the risk of things getting a bit sticky or stuck, as it were… not that I know this from personal experience or anything.

The Design Confidential Oh Christmas Tree + DIY Tree Flocking Without The Mess
The Design Confidential Oh Christmas Tree + DIY Tree Flocking Without The Mess

A closeup shot of this beauty so you can see the difference in color and overall feel.

The Design Confidential Oh Christmas Tree + DIY Tree Flocking Without The Mess

With it lit and sitting pretty you can see the way the bulbs now glow and appear to be more globe like! Just fabulous and truly hard to describe, but a wonderful benefit the whole frosted bulb thing turned out to be