DIY / Home / Studio

THE ART OF PATRÓN // Find Your Inner Light DIY Copper + Handmade Glass Sconce

06.24.15
The Design Confidential Celebrates The Art of Patrón to Find Your Inner Light with a DIY Copper + Handmade Glass Sconce

If you haven’t already begun to amass your collection of artisanal Patrón bottles for the Art of Patrón contest, not to worry there is still plenty of time. But certainly don’t delay because come July 17th, the contest will close and the judging will begin with a total of $19,000 in prizes at stake – one grand prize winner will walk away with an enormous $10,000 grand prize and each of 9 runners up will win a $1000 prize! So put your maker hats on and create something special using those gorgeous handmade Patrón bottles because you just might find yourself a bit richer from the experience… literally. Details for entry and all pertinent contest info can be found on the Art of Patrón contest page.

To give you a bit of a creative kick in the pants and spark your imagination, I will share with you all of the steps and helpful tidbits I discovered while making what I consider to be one of my favorite projects to date. Perhaps I feel this way about every project, but this one is indeed particularly special because even the Mister loves it, it is exceptionally functional, it’s absolutely gorgeous and best of all… completely customizable. All of my favorite things…

The Design Confidential Celebrates The Art of Patrón to Find Your Inner Light with a DIY Copper + Handmade Glass Sconce

Before I let you loose at the hardware store to round up your supplies, here is a little recap on two of the tastiest tequila based cocktails this side of the Mississippi! You know… so you have an excuse to empty those bottles without wasting the deliciousness inside. I think a summer soiree and crafter-hours get together is in order to help you collect some of the most important pieces for recreating this project – or for your very own masterpiece to enter into the Art of Patrón contest!

Coconut Mint Margarita Recipe

Tropical Tequila Sunrise Poptail Recipe

The Design Confidential Celebrates The Art of Patrón to Find Your Inner Light with a DIY Copper + Handmade Glass Sconce

Alright, let’s get to it…

MATERIALS //

Supplies are for 1 sconce – Double all supplies except: ¾” Copper Pipe, Candelabra Base, Pipe Cutter, and Copper Pipe Straps to make 2 sconces.

½” Copper Pipe – 2 Feet

¾” Copper Pipe – 2 Feet

1 – ½” 90 Degree Copper Elbow

1 – ¾” x ½” x ½” Reducer Tee

1 – Candelabra Base (2 Pack)

1 – Candelabra Socket with Switched Cord and Plug

1 – Pipe Cutter

2 – ½” Copper Pipe Straps

1 – LED Exit Sign Light or Night Light with Candelabra Base

1 – Patrón Bottle

The Design Confidential Celebrates The Art of Patrón to Find Your Inner Light with a DIY Copper + Handmade Glass Sconce

Before we can begin to assemble your sconce, we need to do some prep work which means a bit of cutting and some deconstructing.

Copper Cut List //

Feel free to get creative with your arrangement here, but there are a few pieces at the top of this list that need to remain short in order to accommodate the switched cord. You will see what I mean in just a minute.

1 – ½” Copper Pipe at 2”

1 – ½” Copper Pipe at 1 ½”

1 – ½” Copper Pipe at 16” (this is subjective and can be cut to desired length)

1 – ¾” Copper Pipe at 2”

The Design Confidential Celebrates The Art of Patrón to Find Your Inner Light with a DIY Copper + Handmade Glass Sconce

Now this (in my opinion) is where the magic happens… aside from the actual magic that happens when you plug this puppy in and she warms your heart and soul with a job well done.

So you are going to cut your switched cord, right up underneath the black socket and clip. Ok, now you want to cut this as close as possible since you need all the extra cord between your switch and the ends of the wires as you can possibly get. This might seem counter-intuitive since technically the switched cord would work as it is, just fine. But you guys, it’s not cute, so keep on keeping on and you get to play electrician (kind of) for a hot minute, which is soooo fun.

Once you cut off the socket portion, you are going to pull the two sections of cord apart at the top, for about 2 inches. Once they are separated and look a bit like a snake tongue, you can strip the top ¼” or so of the rubberized coating from each section of your cord.

// Now set all these pieces aside for a second since you will actually rewire this after you thread everything through the pipes. Yep, found this out the hard way, maybe it’s true what they say about blondes after all? Duh… that they have more fun? Because doing the same thing over and over again is so fun? Yes, truly.

The Design Confidential Celebrates The Art of Patrón to Find Your Inner Light with a DIY Copper + Handmade Glass Sconce

These two beauties up above are the Reducer Tee and your 2” piece of ¾” pipe and they will fit together to form what we are going to use to make our own amazing looking socket cover. Now isn’t this so much better looking than the base and clip from your cord a few minutes ago? Yes, I totally agree.

Now we get to thread our cord through as we attach our ½” copper pipe pieces. Each piece is labeled below so you can see where everything connects and I will outline the threading order just in case it’s difficult to see or read! You can do this portion laying everything out flat on a surface, it was simply easier for me to strap it to the wall to show you, without trying to juggle the camera and all of the pieces.

The Design Confidential Celebrates The Art of Patrón to Find Your Inner Light with a DIY Copper + Handmade Glass Sconce

Start by threading your cord through your 2 inch section and then up through your elbow piece. Fit each pipe fitting together tight and pull your cord through carefully, but firmly so there is no slack in the line. You will truly need every last inch of this thing. Next, thread your cord through the 1 ½” section and then into and up through your reducer tee. Your reducer tee should have the largest opening at the top. You can attach the lower 16 inch section now if you like, or wait till the end, it really doesn’t make much of a difference just yet. Once your cord is sticking up and out the top of your reducer tee, you will tie the two split sections of it in an underwriters knot. This image below via, is a great diagram of what this will look like and what it’s for!

The Design Confidential Celebrates The Art of Patrón to Find Your Inner Light with a DIY Copper + Handmade Glass Sconce

Once you are all tied up you can attach your ¾” piece of pipe to the reducer tee and get ready to wire your socket.

The Design Confidential Celebrates The Art of Patrón to Find Your Inner Light with a DIY Copper + Handmade Glass Sconce

Thread the cords up through the metal portion of your socket and then the cord with the ribbed edge will be attached to the silver screw and the smooth cord will attach to the gold screw. The easiest way to do this is to twist all of the teeny tiny wires together for each of your cords into something of a point so they are easier to wrap around their respective screws. Then simply use a leftover piece of your ½” pipe if you need a bit of help taming any of the flyaways and gently place it over your screw to let it help you wrap those stray pieces down and back under your screw as you gently tighten in place. The instructions on your package will reiterate which wire to connect where so don’t worry if you forget or feel nervous.

It will look a little something like this:

The Design Confidential Celebrates The Art of Patrón to Find Your Inner Light with a DIY Copper + Handmade Glass Sconce

Now slide your cardboard socket cover over the top as indicated on your package, and you would be ready to give your wiring a little test run with your bulb!

The Design Confidential Celebrates The Art of Patrón to Find Your Inner Light with a DIY Copper + Handmade Glass Sconce

If everything works as expected, unplug and secure in your desired location using two straps and appropriate wall anchor screws for your particular type of wall. If you can secure to a stud, all the better. Once it is all secured tightly in place, add your gorgeous bottle shade and watch the stars come out at night… it’s quite a special show that I will let you experience for yourself. This gorgeous little secret makes this project worth doing all on its own.

The Design Confidential Celebrates The Art of Patrón to Find Your Inner Light with a DIY Copper + Handmade Glass Sconce

This project brought to you in partnership with Patrón Tequila in honor of the Art of Patrón, a contest for makers and a celebration of the handmade. I hope you take a chance and see where your imagination takes you. The prize alone makes it worthwhile, but the satisfaction of making something special using very special materials is priceless.

Plans

Free DIY Furniture Plans // How to Build a 60 Inch Rectangular Dining Table

06.23.15
You Can Build This! Easy DIY Plans from The Design Confidential with Complete Instructions on How to Build an Rectangular Dining Table via @thedesconf

This table is an easy build and can easily be amped up in any manner you wish! Keep it simple and create the table top from a sheet of plywood, or get fancy and use a series of boards and a weathered finish. You can even swap the lumber for Cedar or Redwood prefab fencing (4×4 posts and fence boards) and with a bit of elbow grease in the sanding department you have yourself and pretty fancy outdoor dining table. Get creative or keep it simple, either way we can’t wait to see!

As with all of our plans, you are building at your own risk and you should have a firm understanding of building in general before you attempt many of our plans (some are easy as pie and perfect for beginners). With that, go forth, have fun, take lots of pictures and share them in a showcase on the site or on social media with the hashtag #builtTDCtuff and we will share our faves! Be sure to tag @thedesignconfidential on Instagram / FB and @thedesconf on Twitter / Pinterest. If you are a blogger and you post about your build, don’t forget to include a link to your post on your showcase here. Don’t forget… for all of our newer plans, clicking on the images will let them expand to enormous sizes with much greater clarity. The older plans may need updating so please let us know if you need one fixed!

You Can Build This! Easy DIY Plans from The Design Confidential with Complete Instructions on How to Build an Rectangular Dining Table via @thedesconf
$50-$100
  • 5 – 2×4 at 8’
  • 1 – 3/4” plywood at – 4’x8’
  • 8 – 2×4 at 30” – Legs
  • 1 – 3/4” plywood at 39”x60” – Top
  • 2 – 2×4 at 33” – Short Aprons
  • 2 – 2×4 at 53” – Long Aprons

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Cut the pieces for the Legs. “Sandwich” two Legs together. Secure with glue and 2-1/2” wood screws. This set of two Legs will create one Leg for the Table.

Cut the piece for the Top. With the Kreg jig for 3/4” material, drill pocket holes in locations shown. Secure the Top to the Legs as shown with glue and 1-1/4” pocket screws. Apply edge banding to the exposed edges of the plywood if desired.

Cut the pieces for the Short and Long Aprons. With the Kreg jig for 1-1/2” material, drill pocket holes in both ends and along the bottom edge of each Apron. The Aprons will be set back 1-1/2” from the outer edge of the Top. Secure the Aprons to the Legs and to the Top as shown with glue and 2-1/2” pocket screws.

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

// Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you ONLY use 1 image and provide an ADEQUATE link back to the original source and appropriate plan! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential. By accessing or using any part of the web site, you agree to become bound by the terms and conditions of this website as outlined under Terms of Use. If you do not agree to all the terms and conditions of this agreement, then you may not access the Website or use any services. The information contained in this website is for general information purposes only. The information is provided by The Design Confidential.com and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, personal injury or death, or any loss or damage whatsoever arising from loss of information or profits arising out of, or in connection with, the use of this website. I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it. The Design Confidential.com is inspired by but does not replicate exact designs, any similarities between these plans and items sold at specialty retailers is coincidental and not endorsed by or related to any said retailers. // Affiliate links are used for tools and materials. The Design Confidential will earn a small commission for any items purchased using these links. Thank you for your support – every little bit counts!

DIY / Home / Studio

Crafting With Kids // A Virtual Road Trip + Day at the Fair Crafts

06.22.15
Crafting With Kids A Virtual Road Trip + Day at the Fair with DIY Race Cars and Go Karts

Having two boys with nearly five years between them makes it tricky to find activities to keep them busy during the summer months. There are only a handful of possibilities that will entertain them both, but crafts are at the top of their list… and naturally, getting them out of the house is at the top of mine. I’m pretty excited to tell you that Michaels is offering a kids’ summer crafting program, Passport to Imagination, every Monday, Wednesday and Friday from 10 am – noon from June 14-July 31 at every Michaels location across the U.S.

Maybe this little mama can get some peaceful and uninterrupted craft supply shopping done, while they are entertained with something that I know they will love. Though I’m fairly certain this little face has trouble written all over it, so of course it’s questionable…

Crafting With Kids A Virtual Road Trip + Day at the Fair with DIY Race Cars and Go Karts

We spent a virtual day at the fair and crafted the most adorable race cars and go karts from Perler beads. Now these aren’t really meant for your little ones under the age of 6, since they are the perfect size to stick in little ears and noses… if you get my drift. I’m happy to report that no children were harmed during this process and Penn was under constant supervision during our imaginary expedition to the fairgrounds. His job was mainly to play with the finished product and make a mess with the beads while Blake got to play the role of actually making the creations. Though there is nothing like a mess making adventure to keep an almost three year old happy, am I right? Penn can play that game for hours… or at least a good 7 minutes. Blake on the other hand, was basically on Cloud 9 once he realized these beads were a way for his ideas to become real objects. He made 37 things in a matter of 37 minutes and couldn’t wait to make more!

Crafting With Kids A Virtual Road Trip + Day at the Fair with DIY Race Cars and Go Karts

It was pretty special to see the wheels turning in his creative mind. Maybe he will take after me, who knows… The only thing that is certain on that front is that Passport to Imagination takes kids on an imaginary seven-week summer road trip from the beach to the country fair and more! The Michaels classroom will teach different crafts each session and next week your kiddos will be heading to the fairgrounds too, so get your engines ready racers and put this on your calendar! The crafts are adorable so if you need something fun to keep your kiddos busy, this is perfect!

Crafting With Kids A Virtual Road Trip + Day at the Fair with DIY Race Cars and Go Karts

My boys have a need for speed, so they wanted to create race cars and go karts, but I couldn’t help myself from trying to tempt them with sweet treats and candy… you know, of the pretend kind. When I think of the fair, my mind takes me there, but for them it’s all about the rides and the car rides are their faves.

To make this craft all you really need are a supply of Perler beads, a pegboard to create your designs on, some ironing papers and a household iron. They sell some adorable pattern books to help guide you or give you design ideas and several specialty packages and themed activity kits. We did indeed make it home with a few different options to work with, but aside from our basic supplies the one they actually used for this project was a package that happened to have a couple of car shaped trays. Naturally when I say that we used the car trays, I mainly mean that Penn played with the car trays as if they were literal toy cars, while Blake made a few of the race cars on square trays. It goes to show that you can create your own race cars or go carts by using basic supplies and the ready made package isn’t necessary. He did find it helpful when he made his first race car, since it gave him an example to look at and a shape to work from. They nearly an entire aisle just for these crafts and we went more than a little crazy on the supply side, but I knew this would be a huge hit in my house!

Crafting With Kids A Virtual Road Trip + Day at the Fair with DIY Race Cars and Go Karts

Making the designs is relatively simple and there are dozens of patterns to give you inspiration. If you are attempting to recreate a specific design with specific colors (like ours), I recommend counting the beads, it makes the job so much easier! Blake placed the beads in a variety of shapes, with different colors and even added little men inside the cars. Once you have a design you like, it's time for the kiddos to let an adult take over and put that iron to good use. My iron got more of a workout with this craft project than it has ever seen… ever.

Crafting With Kids A Virtual Road Trip + Day at the Fair with DIY Race Cars and Go Karts
Crafting With Kids A Virtual Road Trip + Day at the Fair with DIY Race Cars and Go Karts

While your kiddos are trying to do circus tricks on their scooters, you are going to cover their designs with the special ironing papers and with your iron on a medium setting, carefully solidify the designs by running your iron in a circular motion for about 20 seconds. You can generally tell when you are done if you can see each bead touching the ironing sheet. This sounds funny, but when you are making your go karts or ice cream cone designs, you will see what I mean as you heat them up.

Crafting With Kids A Virtual Road Trip + Day at the Fair with DIY Race Cars and Go Karts

Once you iron on one side, let it cool, then flip that baby over and iron in just the same way on the other side. Once it has cooled, it is ready for fun! My boys particularly enjoyed pretending theirs were bumper cars – because they are boys and apparently that is how they roll!

Crafting With Kids A Virtual Road Trip + Day at the Fair with DIY Race Cars and Go Karts
Crafting With Kids A Virtual Road Trip + Day at the Fair with DIY Race Cars and Go Karts

Wondering why my boys look so cute? it’s because I bribed them with cool clothes. It is the strangest thing to me since they are young boys, but both care about what they wear so very much. As it turns out, Penn, the littlest of my two prefers his woven shirts buttoned to the top, thank you very much… Their outfits are from Gymboree and I love offer cute, coordinated looks that help your little ones enjoy the little and big moments this summer—from craft time to fair time – no amount of buttons or lack thereof will get in the way of their happiness or fun!

Since 1976, Gymboree has proudly watched kids learn and grow through the power of play and seen firsthand the desire from Mom for cute, comfortable, coordinated style at an everyday great price.

If you want to get in on the action too, join me over on Instagram…

#CraftInStyle Instagram Weekly Sweepstakes

Michaels and Gymboree have teamed up for a 7-week, weekly Instagram sweepstakes, encouraging Moms to share a photo of her family getting crafty and inspired by each week’s summer destination. The weekly winner will receive a $100 Gymboree gift card, a $100 Michaels gift card and craft supplies!

All you have to do is:

· Follow @Gymboree and @MichaelsStores on Instagram

· Post a picture of how your family crafts in style

· Tag your photo with #CraftInStyleSweeps

This project was created in partnership with Gymboree and Michaels! Thank you for supporting the awesome folks who help me spend time with my kiddos. Having a crafty day with them at our virtual county fair was fabulous and worth every moment of crazy for this proof of their youth and some creative fun for them this summer. Join in at your nearest Michaels store and have some crafty fun too!

Plans

Free DIY Furniture Plans // How to Build A Raised Cube Planter

06.15.15
You Can Build This! Easy DIY Plans from The Design Confidential with Complete Instructions on How to Build a Raised Cube Planter via @thedesconf

Plants are my jam… you might have noticed? Both inside and in the great outdoors, planters are such an important feature. It’s easy to see why they are perfect for your indoor beauties, but I adore using planters and pots outside as well to give interest and height to my plantings. In groupings on a patio or carefully placed throughout your landscape, there is no spot that wouldn’t benefit from something like this! This planter is perfect for that vacant spot in your family room that is just aching for something living and would be a stunner scattered throughout your patio living space to spice things up and provide beauty, aside from the beauty of your lush greenery of course. Duh… Now get building and let some sawdust fly! And if you find an online resource that has a great selection of teak, cedar or redwood (all ideal for outdoor uses), let us know in the comments so we can all take our projects to the next level here as well!

As with all of our plans, you are building at your own risk and you should have a firm understanding of building in general before you attempt many of our plans (some are easy as pie and perfect for beginners). With that, go forth, have fun, take lots of pictures and share them in a showcase on the site or on social media with the hashtag #builtTDCtuff and we will share our faves! Be sure to tag @thedesignconfidential on Instagram / FB and @thedesconf on Twitter / Pinterest. If you are a blogger and you post about your build, don’t forget to include a link to your post on your showcase here. Don’t forget… for all of our newer plans, clicking on the images will let them expand to enormous sizes with much greater clarity. The older plans may need updating so please let us know if you need one fixed!

You Can Build This! Easy DIY Plans from The Design Confidential with Complete Instructions on How to Build a Raised Cube Planter via @thedesconf
$25-$50
You Can Build This! Easy Outdoor DIY Plans from The Design Confidential Free DIY Furniture Plans // How to Build A Raised Cube Planter via @thedesconf

For outdoor projects // Teak, Cedar and Redwood are recommended. These are typically more expensive, however this varies by region and of course each region has affordable alternatives that will work well if the previously mentioned ideals are not really an option due to budget. Which specie is best will depend on your regions climate among other things and may vary greatly from region to region. Which is the best choice for your project might be a great question to ask your local lumber supplier and regardless of lumber choice, just be sure to seal, seal, seal to protect from the elements for the greatest possible longevity and least amount of ongoing maintenance.

  • 1 – 1×2 at 3’
  • 2 – 2×2 at 8’
  • 1 – 3/4” plywood at – 4’x4’
  • 4 – 2×2 at 11” – Legs
  • 8 – 2×2 at 15” – Upper and Lower Sides
  • 2 – 1×2 at 15” – Planter Supports (could also use 2x2s scraps for this)
  • 2 – 3/4” plywood at 11-3/4”x18” – Front and Back
  • 2 – 3/4” plywood at 11-3/4”x16-1/2” – Sides
  • 1 – 3/4” plywood at 16-1/2”x16-1/2” – Bottom

Read through the entire set of instructions and all comments before beginning this project, there are often tidbits on adjustments or helpful hints for the build and possible typos that should be accounted for. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques, and helpful hints for easier building. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a protective sealant type product such as a wax or polyurethane (spray on Poly or Wipe on Poly are extremely easy to apply and use) to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow proper safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Check back often for new tips, tricks, and helpful info for building as we will be adding to this section of the site quite a bit in the coming months. Holler at me if you need help and have fun!

Cut the pieces for the Legs and Upper Sides. With the Kreg jig for 1-1/2” material, drill pocket holes in both ends of the Upper Sides. Secure the Upper Sides to the Legs with glue and 2-1/2” pocket screws.

Cut the pieces for the Lower Sides. With the Kreg jig for 1-1/2” material, drill pocket holes in both ends of the Lower Sides. Secure the Lower Sides to the Legs with glue and 2-1/2” pocket screws.

Cut the pieces for the Planter Supports. With the Kreg jig for 3/4” material, drill pocket holes in both ends of the Planter Supports. Secure the Planter Supports to the Upper Sides with glue and 1-1/4” pocket screws.

Cut the pieces for the Front, Back, and Sides. With the Kreg jig set for 3/4” material, drill pocket holes in both sides of the Sides and along the bottom edge. Drill another set of pocket holes in the bottom edge of the Front and Back pieces. Assemble the Front, Back, and Sides as shown with glue and 1-1/4” pocket screws. Attach the Front, Back, and Sides to the Upper Sides with glue and 1-1/4” pocket screws. Apply edge banding to the exposed edges of the plywood on the Planter if desired.

Cut the piece for the Bottom. Place inside the Planter as shown and attach to the Upper Sides and Supports with glue and 1-1/4” wood screws. The bottom image shows the Bottom attached to the Planter, with the Front, Back, and Sides removed for an easier view. For better soil drainage, you can drill a few holes in the Bottom!

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

// Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you ONLY use 1 image and provide an ADEQUATE link back to the original source and appropriate plan! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential. By accessing or using any part of the web site, you agree to become bound by the terms and conditions of this website as outlined under Terms of Use. If you do not agree to all the terms and conditions of this agreement, then you may not access the Website or use any services. The information contained in this website is for general information purposes only. The information is provided by The Design Confidential.com and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, personal injury or death, or any loss or damage whatsoever arising from loss of information or profits arising out of, or in connection with, the use of this website. I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it. The Design Confidential.com is inspired by but does not replicate exact designs, any similarities between these plans and items sold at specialty retailers is coincidental and not endorsed by or related to any said retailers. // Affiliate links are used for tools and materials. The Design Confidential will earn a small commission for any items purchased using these links. Thank you for your support – every little bit counts!

DIY / Home

In The Garden // Lush Leafy Green + A Privacy Screen

06.11.15
The Design Confidential In The Garden // Lush Lean Green + A Privacy Screen

I mentioned a few months back that one of my goals this year is to add year round color and interest to my backyard with evergreen plants and flowering vines and shrubs. One thing I have discovered over the last two years is that once those leaves begin to turn each fall and then remain to be unseen through the winter months, that there is in fact another fabulous thing we get to experience along with our sea of beige in suburbia… and that would be our neighbors. Now, it’s not that I dislike my neighbors.. in fact I truly do… but our house happens to back up to a wonderfully landscaped and well maintained pedestrian path. This means of course that everyone in the neighborhood makes wonderful use of this wonderful space and once those trees are bare, well it feels just a bit like we are on display.

Did I mention my boys, and my dogs, and my husband… all of whom truly dislike to keep a tidy backyard space? Ya… so privacy all the live long year is a critical component for this round of plantings. I mean, we should all be able to choose when we want to entertain and when we don’t, if you get my drift.

The Design Confidential In The Garden // Lush Lean Green + A Privacy Screen

Now a girl can’t live surrounded by nothing other than a sea of green, especially when she is coming straight off the heels of such a spectacular sea of beige… so naturally the perfect solution is to add an evergreen privacy screen that is both fast growing and grows quite tall, then pepper that with gorgeous flowering plants that also stick around through the colder days of the year.

For this round of plantings I kept it simple and focused on several English Laurel for privacy and that lush leafy feel and a few of the most gorgeous Orange King Bougainvillea to provide color and interest to that boring beige stone wall. The Laurel will get nearly 30 feet tall and apparently can grow to 30 feet in width too! Can I get a yahoo? When the bougainvillea isn’t in bloom, the leafy vines will still give me that organic something extra to grow along my fence line and provide something special to my vertical space. Oh that Monrovia always does it for me. I have such amazing success with their plants regardless of where I purchase them. The minute I stray, I start to kill things and it’s very, very sad.

I am more than excited to stare lovingly at my lean leafy green privacy screen and can’t tell you how happy I am that I won’t have to watch my neighbors walk by all day long during the winter months… you know, since we haven’t had any rain and are in the midst of a drought, it seems getting outside for fresh air and excersize is fair game all year round. At least now I don’t have to participate… unless I choose to.

So how does your garden grow? Any new faves at your local nursery? Let’s swap ideas! I love a good garden suggestion!!

Plans

Free DIY Furniture Plans // How to Build a Vintage Inspired French Work Table

06.08.15
You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build a Vintage Inspired French Work Table via @thedesconf

Did you miss me? Did you notice all was quiet on the western front for a few days? No? Well, I still love you guys… Oh how fun is this project. I feel like it would be a chic outdoor gardening area, or a fabulous covered work table that just bekons stylish creation… don’t you think? Yahoo.

As with all of our plans, you are building at your own risk and you should have a firm understanding of building in general before you attempt many of our plans (some are easy as pie and perfect for beginners). With that, go forth, have fun, take lots of pictures and share them in a showcase on the site or on social media with the hashtag #builtTDCtuff and we will share our faves! Be sure to tag @thedesignconfidential on Instagram / FB and @thedesconf on Twitter / Pinterest. If you are a blogger and you post about your build, don’t forget to include a link to your post on your showcase here. Don’t forget… for all of our newer plans, clicking on the images will let them expand to enormous sizes with much greater clarity. The older plans may need updating so please let us know if you need one fixed!

You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build a Vintage Inspired French Work Table via @thedesconf
$100-$150
You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build a Vintage Inspired French Work Table via @thedesconf
  • 1 – 1×2 at 8’
  • 4 – 2×2 at 8’
  • 4 – 2×4 at 8’
  • 1 – 3/4” plywood at – 4’x8’
  • 3 – 1/2” diameter Wooden Dowel Rods at 8’
  • 2 – 2×4 at 30” – Sawhorse Tops
  • 8 – 2×4 at 24” – Sawhorse Sides
  • 4 – 1×2 at 7-1/4” – Sawhorse Bottoms
  • 2 – 2×4 at 26” – Sawhorse Stretchers
  • 2 – 3/4” plywood at 3-1/2”x30” – Table Sides
  • 1 – 3/4” plywood at 30”x66-1/2” – Table Bottom
  • 1 – 3/4” plywood at 2-3/4”x66-1/2” – Table Back
  • 2 – 3/4” plywood at 4-3/4”x20” – Cabinet Sides
  • 1 – 3/4” plywood at 4”x12” – Cabinet Back
  • 1 – 3/4” plywood at 12”x20” – Cabinet Bottom
  • 2 – 3/4” plywood at 3-1/4”x18” – Drawer Sides
  • 1 – 3/4” plywood at 2-1/2”x10-1/4” – Drawer Back
  • 1 – 3/4” plywood at 10-1/4”x18” – Drawer Bottom
  • 1 – 3/4” plywood at 4-1/2”x13-1/2” – Drawer Front
  • 2 – 2×2 at 96” – Awning Posts
  • 4 – 2×2 at 36” – Awning Arms
  • 4 – 1×2 at 12” – Awning Supports
  • 3 – 1/2” diameter Wooden Dowels at 74” – Dowel Rods

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Cut the pieces for the Sawhorse Tops and Sawhorse Sides. With the Kreg jig for 1-1/2” material, drill pocket holes in the top ends of the Sawhorse Sides. Secure Sawhorse Sides to the Sawhorse Top with glue and 2-1/2” pocket screws. Repeat twice, once for each Sawhorse.

Cut the pieces for Sawhorse Bottoms and Sawhorse Stretchers. With the Kreg jig set for 3/4” material, drill pocket holes in both ends of the Sawhorse Bottoms. Attach the Sawhorse Bottoms to the Sawhorse Sides as shown with glue and 1-1/4” pocket screws. Make sure that the pocket holes face the ground when assembling. Attach the Sawhorse Stretcher to the Sawhorse Bottoms with glue and 2” wood screws. Repeat twice, once for each Sawhorse.

Cut the pieces for Table Sides, Table Back, and Table Top. With the Kreg jig set for 3/4” material, drill pocket holes along the outer bottom sides of the Table Sides, to later attach to the Sawhorses.

With the Kreg jig set for 3/4” material, drill pocket holes along the left and right bottom sides of the Table Top. Attach the Table Sides to the Table Top with glue and 1-1/4” pocket screws.

With the Kreg jig set for 3/4” material, drill pocket holes in both ends of the Table Back. Attach the Table Back to the Table Sides with glue and 1-1/4” pocket screws. Attach the Table Back to the Table Top with glue and 1-1/4” wood screws, starting the screws from the underside of the Table Top. Apply edge banding to the exposed edges of plywood on the Table if desired.

Now it’s starting to shape up! Attach the Table Top to the Sawhorses (through the Table Sides) as shown with glue and 1-1/4” pocket screws.

Next, cut the pieces for the Cabinet Sides, Cabinet Back, and Cabinet Bottom. With the Kreg jig set for 3/4” material, drill pocket holes in both ends of the Cabinet Back (on the back side) and along the top edge. Drill pocket holes along the top edge of the Cabinet Sides. Attach the Cabinet Back to the Cabinet Sides with glue and 1-1/4” pocket screws.

Attach the Cabinet Back/Cabinet Sides to the Table Top as shown with glue and 1-1/4” pocket screws.

With the Kreg jig set for 3/4” material, drill pocket holes along the sides of the Cabinet Bottom on the bottom side. Attach the Cabinet Bottom to the Cabinet Sides and Cabinet Back as shown with glue and 1-1/4” wood screws. Apply edge banding to the exposed edges of plywood on the Cabinet if desired.

Cut the pieces for the Drawer Sides, Drawer Back, Drawer Bottom, and Drawer Front. With the Kreg jig set for 3/4” material, drill pocket holes along the front ends of the Drawer Sides, at each end of the Drawer Back, and along the front and sides of the Drawer Bottom on the bottom.

Attach the Drawer Front to the Drawer Sides and Drawer Bottom as shown with glue and 1-1/4” pocket screws. The Drawer Front will extend beyond the Drawer Sides on the top by 1/2”, the sides by 7/8”, and the bottom by 3/4”. Apply edge banding to the exposed edges of plywood on the Drawer if desired.

Install the Drawer into the Cabinet as shown. After finishing, apply a coat of paste wax to the bottom of the Drawer Box to help it slide smoothly. Add drawer hardware such as a pull or knob if desired. Drawer Box will have a 1/8” gap on each side once installed inside the Cabinet.

Cut the pieces for the Awning Posts, Awning Arms, and Awning Supports. With the Kreg jig set for 1-1/2” material, drill pocket holes on one end of each Awning Arm. With the Kreg jig set for 3/4” material, drill pocket holes on each end of the Awning Supports. Drill 1/2” diameter holes on one end of each Awning Arm (the opposite end from where the pocket holes were drilled) and at the top of the Awning Post as shown. Attach the Awning Arms to the Awning Post with glue and 2-1/2” pocket screws. Attach the Awning Supports to the Awning Arms and Awning Post with glue and 1-1/4” pocket screws. Repeat twice, once for each side of the Work Table.

Clamp the Awning Sides to the Work Table as shown. Drill pilot holes and screw in the Lag Screws in the locations noted. Repeat for each side of the Work Table.

Cut the piece for the Cloth Awning. If you cannot find fabric wide enough for the Cloth Awning, feel free to sew two pieces together to get the appropriate width. Turn under each side of the Cloth Awning 1/2”, iron, turn over another 1/2”, and iron again. To secure the edges of the fabric, you can use iron-on adhesive, fabric glue, or sew the edges.

Cut the pieces for the Dowel Pockets. Turn over all sides of the Dowel Pockets 1/2”, iron, turn over another 1/2”, and iron again. To secure the edges of the fabric, you can use iron-on adhesive, fabric glue, or sew the edges.

Place the Dowel Pockets on the Cloth Awning as shown. Secure the Dowel Pockets to the Cloth Awning along the long edges of the Dowel Pockets, leaving the ends open to later accept the Dowel Rods. To secure the fabric together, you can use iron-on adhesive, fabric glue, or sew into place.

Cut the pieces for the Dowel Rods. Insert a few inches of one end of the Dowel Rod into the drilled hole in the Awning Arm. “Thread” the Dowel Rod into the end Dowel Pocket of the Cloth Awning. Next, guide the Dowel Rod into the opposite Awning Arm. Repeat this process with the Dowel Rod at the top of the Awning Post and the Dowel Rod at the other end of the Cloth Awning. The Dowel Rods will extend past the Awning Sides by 1-1/2” on all ends. If you wish to secure the Dowel Rods into place, use 1-1/4” brad nails where the Dowel Rods pass through the Awning Arms and Awning Posts.

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

// Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you ONLY use 1 image and provide an ADEQUATE link back to the original source and appropriate plan! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential. By accessing or using any part of the web site, you agree to become bound by the terms and conditions of this website as outlined under Terms of Use. If you do not agree to all the terms and conditions of this agreement, then you may not access the Website or use any services. The information contained in this website is for general information purposes only. The information is provided by The Design Confidential.com and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, personal injury or death, or any loss or damage whatsoever arising from loss of information or profits arising out of, or in connection with, the use of this website. I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it. The Design Confidential.com is inspired by but does not replicate exact designs, any similarities between these plans and items sold at specialty retailers is coincidental and not endorsed by or related to any said retailers. // Affiliate links are used for tools and materials. The Design Confidential will earn a small commission for any items purchased using these links. Thank you for your support – every little bit counts!

Showcase

Builders Showcase // Copenhagen Media Stand

06.02.15
The Design Confidential Builders Showcase for the Copenhagen Media Stand

Tired of the Target 100$ entertainment centers – this one caught my eye.

This is the Copenhagen Media Stand. I didnt like the view showing all the sandwiched layers from the end and the front so I framed the whole thing in Redwood. I also used pine that had pine beetle discoloration. Got lucky and spotted some pre-made panels with pine beetle damage – someone at the plant used their head and alternated the colored strips with normal strips when they built them. For the top I joined several strips to meet the altered dimensions I used – a few inches shorter than the plans.

Estimated Cost 

~$140 – drawer pulls and sliders were biggest expense – even more so if you go with the slow close sliders…

Length of Time 

Took me a few months but only because we had a baby mid build. Probably only 5 or 6 days of real build time – with a bit of a learning curve for the drawer slider installation.

Lumber Used 

Pine – pine beetle damaged for color

Pine project board with pine beetle damage cut up for drawer fronts.

Redwood for framing.

Finishing Technique 

Oil based polyeurathane.

The Design Confidential Builders Showcase for the Copenhagen Media Stand
The Design Confidential Builders Showcase for the Copenhagen Media Stand
The Design Confidential Builders Showcase for the Copenhagen Media Stand
The Design Confidential Builders Showcase for the Copenhagen Media Stand
The Design Confidential Builders Showcase for the Copenhagen Media Stand

Plans

Free DIY Furniture Plans // How to Build a Hex Wood + Glass Coffee Table

06.01.15
You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build a Hex Wood and Glass Coffee Table via @thedesconf

The coffee table is essentially the heart of the home in our house, though our kitchen island comes in at a close second. Having such a key component be both good looking and super chic makes me love this project so very much. Go forth and add some heart to your home…

As with all of our plans, you are building at your own risk and you should have a firm understanding of building in general before you attempt many of our plans (some are easy as pie and perfect for beginners). With that, go forth, have fun, take lots of pictures and share them in a showcase on the site or on social media with the hashtag #builtTDCtuff and we will share our faves! Be sure to tag @thedesignconfidential on Instagram / FB and @thedesconf on Twitter / Pinterest. If you are a blogger and you post about your build, don’t forget to include a link to your post on your showcase here. Don’t forget… for all of our newer plans, clicking on the images will let them expand to enormous sizes with much greater clarity. The older plans may need updating so please let us know if you need one fixed!

You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build a Hex Wood and Glass Coffee Table via @thedesconf
$75-$125
You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build a Hex Wood and Glass Coffee Table via @thedesconf
  • 1 – 3/4” plywood at 4’x8’
  • 1 – 1×2 at 8’
  • 1 – 1/4” thick Glass or Plexiglas at 3’x3’
  • 2 – 3/4” plywood at 16”x21” – Long Panels
  • 4 – 3/4” plywood at 16”x17” – Short Panels
  • 1 – 3/4” plywood at 27-3/4”x36-1/8” – Bottom
  • 2 – 1×2 at 18” – Long Cleats
  • 4 – 1×2 at 14” – Short Cleats
  • 1 – 1/4” thick Glass or Plexiglas 27-1/2”x35-3/4”- Top

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Cut the pieces for the two Long Panels and four Short Panels. The sides of the Panels will be cut at a 60-degree angle as shown. For the interior cuts, start at the inside corner of the cut-out and drill a hole slightly larger than the blade of the jigsaw. Insert the jigsaw blade and make the cut. Apply edge banding, if desired, to the cut-out edges. With the Kreg jig set for 3/4” material, drill pocket holes along the inside of each left and right side of one of the Long Panels and two of the Short Panels. Assemble as shown with glue and 1-1/4” Pocket Hole Screws.

Cut the piece for the Bottom. With the Kreg jig set for 3/4” material, drill pocket holes along each side of the Bottom. With the pocket holes facing the ground, assemble as shown with glue and 1-1/4” Pocket Hole Screws.

Cut the pieces for the Long and Short Cleats. Attach to the inside edges, centered, of the Panels as shown with glue and 1-1/4” Wood Screws. This plan uses 1/4” thick glass for the Top, so the Cleats will be positioned 1/4” from the top of the Panels.

Cut the piece for the Top. Assemble as shown.

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

// Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you ONLY use 1 image and provide an ADEQUATE link back to the original source and appropriate plan! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential. By accessing or using any part of the web site, you agree to become bound by the terms and conditions of this website as outlined under Terms of Use. If you do not agree to all the terms and conditions of this agreement, then you may not access the Website or use any services. The information contained in this website is for general information purposes only. The information is provided by The Design Confidential.com and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, personal injury or death, or any loss or damage whatsoever arising from loss of information or profits arising out of, or in connection with, the use of this website. I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it. The Design Confidential.com is inspired by but does not replicate exact designs, any similarities between these plans and items sold at specialty retailers is coincidental and not endorsed by or related to any said retailers. // Affiliate links are used for tools and materials. The Design Confidential will earn a small commission for any items purchased using these links. Thank you for your support – every little bit counts!
Home / Shopping / Travel

Travel Guide // Necessities for Stress Free Summertime Travel with Kids

05.31.15
The Design Confidential Travel Guide and Necessities for Stress Free Summertime Travel with Kids via @thedesconf

As a family with young kiddos, we do quite a bit of travel by car. From day-cations to longer vacations – one thing is certain – we generally have a wide variety of activites on the itenerary and anything that can go wrong… will. I have found in my moderately short time as mom that the key to stress free travel with kids is packing well and planning for both comfort and convenience. Sacrificing one for the other usually only results in an unhappy camper and I will be damned if that unhappy camper is going to be me. I have rounded up my tried and true list of things that I don’t leave home without when we hit the road. Whether you are planning on adventuring to a theme park or spending hours on end at the beach this summer, or both, this list will come in handy.

The Design Confidential Travel Guide and Necessities for Stress Free Summertime Travel with Kids via @thedesconf

1 // Ergo Baby Carrier – My baby is now 2 1/2, so essentially not a baby at all. I still carry him in my Ergo, all… the… time… It is perfect following those sleepy car ride naps, when I am ducking into a thrift shop or antique trove, or when we are traipsing down to the beach carrying no less than one million things. When a stroller simply won’t do and I need to free up my hands while I load myself up like a pack mule, or when I need to convert the stroller into a shopping cart, or my toddler with busy hands and a tendency towards an impromptu sprint happens to be along for the ride, a carrier like this is a must have. I can wear it for hours without feeling fatigue or discomfort even at this age and stage with Penn.

2 // Sun Shelter Umbrella – We layer two umbrellas when we head to the beach, for maximum shade canopy creation and so that the kids have some shade to play under while the adults lounge in comfort and watch.

3 // Waterproof / Shockproof iPad Case – We are a tech driven kind of family. The number of tablets we have is embarrassing but the kids use them for so many things. We have never purchased a tablet for one of the kids, but they often gravitate toward and eventually seem to take over and slime up one of our tablets, so it helps to protect those babies with cases that prevent many kinds of disaster. And indeed I am constantly shocked by the type of disasters that occur. Many of them are freak accidents that you wouldn’t even think to prepare for.

4 // Seat Protector – With one kiddo who gets carsick and both that we tend to take with us in the car and then eat and get covered with sand, a seat protector is just another barrier between the disaster makers and your seats.

5 // Battery Pack – See item number three above. Need I say more. This battery pack is powerful and can charge two items at a time. That is super helpful when you have kids that fight over stuff.

6 // Rolling Cooler – Part cooler for extra water and small snack items, part luggage cart. Perfect for those times when you could really benefit from an extra hand or three.

7 // Director’s Chair with Tray – A chair with a tray and cupholder has turned out to be the more durable type of folding chair when it comes to the beach of camping variety of chair. We have gone through more chairs than I care to admit, and most of our casualties seem to be those that have the fabric strip as the armrest with a cup holder net on the end of one or both arms. We are not actually that hard on our chairs, yet… so I feel like this is definitely saying something. You would think this variety would last the longest, since they are flexible, but somehow they just don’t. Not to mention, it’s awfully nice to have a bit of a surface to work with when you aren’t bringing along a large solid cooler that would otherwise double as extra seating or a surface when you need it.

The Design Confidential Travel Guide and Necessities for Stress Free Summertime Travel with Kids via @thedesconf

1 // Parent Console – If you have young children you already know that your stroller is an extension of your home and your car once you leave the house. Having a decent parent console for your stroller is crucial. If you stroll along for any period of time, you will need easy access pockets for things like your phone or your water / coffee / flask (kidding… kind of) and anything else you will need frequently and don’t want to dig for in your stroller basket. I have had some horrible consoles and some great ones, so if you find your precious stroller doesn’t come with one that works for you, get a universal one that does. Deep cup holders are critical for avoiding those nagging little spills when you are traversing bumpy terrain and easy access pockets that are separate from these cup holders are extremely helpful when you have 7 drinks to store, 3 of which don’t have screw tops and you still want to put your phone somewhere other than your pocket.

2 // Snack Tray – Many strollers come with these but once you enter the arena of modular strollers with a variety of accessory options, they don’t. Skip the belly bar and do yourself a solid by choosing the snack tray right out of the gate. If you are going someplace and plan to use your stroller, chances are your kids will be in them for longer than 5 minutes. A cup holder for drinks and even small toys will go a long way toward keeping them content with being in a fixed position. I can’t count the number of times my kids have eaten in their strollers when they are at that awkward age of being too little to sit in a chair and not so little that they don’t eat actual food. Lifesaver for so many reasons.

3 // Clip On Fan – I have had a great many stroller experiences that involve long days and hot climates. No matter how fancy and breathable your canopy claims to be, once you cover, shield and protect your kiddo from those vicious sun rays… they are going to get hot and then they are miserable – and so are you. A clip on fan that has a guard and actually moves air will truly help keep your kids from overheating. There are hundreds of clip fans out there so navigating can be tricky but if your kids are anything like mine, and your fan doesn’t have a guard, there is a high probability that your kids will not be able to stop grabbing those brightly colored foam blades. This is not really a safety issue, since the blades are soft, but if your kid is fixated and won’t keep their hands off of those spinning contraptions, there won’t be much cooling or air movement happening and you will have a sleep deprived squirmy kiddo and you will have to re-clip that damn thing every five seconds.

4 // Hooks – Your stroller should have a huge under carriage basket and it should be easy to access at all times. The end. But, there are many occasions where you will find yourself short on storage space even with a large basket, and this is where parent hooks come in handy. For long days where you won’t be going to the car frequently, or at all, and that basket will be loaded to the brim. These extra hooks are perfect for hanging shopping bags or totes that you want easy access to, without having to dig for days through all of the stuff down below.

5 // Side Sling – A convenient mesh storage bag that doesn’t hang directly over your basket. Perfect for wet bathing suits and towels, toys – especially of the sand digging and castle making variety, and anything else you want to keep from commingling with your other stuff and don’t want to mildew.

6 // Sun Shade – There are very few stroller canopies out there that are large enough to fully block the sun from all or even most parts of your child. Even the articulating shades are frustrating and some part of your babe is going to be left out to fry. My kids have had some interesting tan lines over the years, depending on their attire, even with constant sun block application so an aftermarket add-on shade goes a long way toward extending their canopy and can often be used on their car seats as well.

7 // Baby Jogger Single to Double Tandem Stroller – A topic all on its own. See below for lots of words on the matter.

8 // Stroller Cooler – A cooler that attaches to your stroller without taking up precious storage space and without needing to be carried… unless you want to. In which case, this sucker comes off and converts to a diaper bag cooler of sorts. Cool, right? Anything to expand my storage and add extra functionality for those times a rolling cooler just won’t do. Like at the zoo, or Disney. Also a great way to store your electronics if you don’t need to store food or drinks. Just sayin’…

The Design Confidential Travel Guide and Necessities for Stress Free Summertime Travel with Kids via @thedesconf

Ahhhh, the great stroller debate. It’s endless and complex and seemingly ever changing, to be sure. There are so many options that it will make your head spin. Like spreadsheet creating kind of complicated, just so you can compare and contrast all of the features and functions of the strollers within your price point. This could be an entire article on all its own merit, but I will spare you an infinite amount of words on the topic, and instead give you a mere hundreds…. Truly the condensed version – trust me. Ultimately the stroller choice is a personal one and it seems as though it has become something of a status symbol and a matter of pride when you can stroll along with ease, beaming at the level of comfort and convenience your choice provides for you and your family. Sad… but true. At least this is how I interpret the looks on other people’s faces when I am out and about, so I can only assume that I must also fall prey to this.

So here is the skinny, as far as it relates to my personal needs and wants. If you have any of the same requirements or struggles, I hope this helps.

Over the last 8 years I have owned and used dozens of strollers. Dozens. This is not a joke. Just ask the Mister how he feels about strollers, he will tell you. I think finding the right stroller is like finding the perfect car or home. It needs to be comfortable, convenient, and have everything you may possibly need and more because your sanity depends on it.

When you consider the price tag on strollers, my preferred stroller of choice falls somewhere in the middle between the all-inclusive basic travel system strollers like Chicco or Graco and the high-end, high price point, luxury strollers like Bugaboo and Orbit. If I had to choose between a basic but all encompassing stroller like a Graco / Chicco and a Bugaboo / Orbit, I would probably choose the Graco / Chicco stroller 9 times out of 10. This is because those less expensive travel systems actually factor in comfort and convenience of both kids and parents much better than those luxury brands seem to, and you will pay 1/5 of the price for all the bells and whistles – the accessories and features are not add-ons.

If you have been following this blog for any period of time, you know that I am a huge fan of all things modular because I like to have options and I hate to go without. The number one downside for 99% of the luxury strollers out there is that damned miniature basket they sport. I mean… seriously, what gives? Do they assume that if I can afford that stroller that I probably also have a butler in tow, everywhere I go? Ridiculous.

But, the thing that has made me a die hard lover of this particular stroller system is that it’s the only stroller on the market that can easily adapt from a single to a double stroller with multiple seat arrangement possibilities and has a wonderful basket and adjustable everything – it’s a dream come true. There are several modular strollers out there that can go between a single and a double, but none that sit tandem, that don’t skimp on the second seat by making it a jump seat, that force you to sacrifice all of your storage space to house the second rider’s feet and legs or that give you all of the amazing features you could possible want but set you back upwards of $1500. I mean, shucks… at that point, just get yourself the butler, or hire a nanny and leave those kids at home, am I right?

This stroller comes pretty close as far as I can tell, and has a fabulous price point. It’s absolutely worth checking out and the shopping basket option in place of the second seat seriously is the bomb dot com. The only thing I’m unsure about is if when you remove the second seat, it remains just as long as if you hadn’t. That is not a deal breaker necessarily, but I will say that I like that when I use mine as a single, it is truly a single and steers and rides and takes up only as much space as a single. But perhaps the extra storage space is actually a bonus and I have been missing out on something amazing (absolutely possible)… I would be very interested to hear from someone who owns one of these!

Also, a little known fact that they don’t seem to advertise about this stroller is that the canopy is removable as a whole. As in… the whole thing, frame and all, actually clips and unclips. This may sound unimportant, but for those of you who have tall children or use your strollers for far longer than most (guilty!), this is fabulous because it means that you can actually clip the canopy onto the frame a bit higher up than it normally sits and give those kiddos extra headroom. This is also helpful for adventuring in hot climates, regardless of the size of your kiddo, because it allows you open up that space between the canopy and the top of the seat back, without actually opening the canopy itself. This single seemingly unimportant thing lets the air flow all the way through, front to back, which helps with the heat more than you can even imagine. Along with a clip on fan, this is the difference between a peaceful trip and a chaotic and stressful trip with the stroller. Have you ever tried to sleep when you are drenched in sweat because it’s one million degrees and there is absolutely no breeze whatsoever? Ya… like that.

I could go on and on about the things I like and dislike about so many strollers, but in truth the few things I mention above are the standout items that will make or break a good stroller choice if you plan to give your stroller a serious run for its money. Aside from a personal preference for a tandem arrangement versus and side-by-side arrangement (because, I frequent places that are hard to navigate in a double wide and my boys drive me nuts when they can see, reach, or touch each other), I consider many of the previously mentioned tidbits to be somewhat universal. You may have different requirements and your kids may have different needs and wants, but at some point many of these things will factor into your general love for your stroller or lack thereof. Promise. And yes, my older boy is seemingly way too old to ride in a stroller, but for days with lots of walking, he loves to jump in and stroll. Frankly I like that he still can as well. He may be nearly 8 but he is still under the weight limit so it’s just a matter of his height that isn’t ideal. Since he really just uses it for brief moments throughout the day when we have much walking and exploring on the horizon, this is a non-issue and seems to work beautifully between rides at an amusement park or when we are hurrying to get from one place to the next and he is petering out.

Have you embarked on the great stroller hunt or begun to collect a vast amount of gear for travelling with your kiddos in comfort? I would LOVE to know what you found and anything that you think is crucial as a feature for a good piece of gear that will go the distance and span the ages of your children. Do tell…

Plans

Free DIY Furniture Plans // How to Build an Aegean Outdoor Sofa

05.27.15

It’s official… you need an outdoor living space for the summer months ahead, so go for it and build a super stylish sofa and solve your seating woes in just a few hours… I promise you will be so happy you did and so will I when you share your success with all of us in a showcase post.

// The cushion option here that will work best are the Outdoor Deep Seating Cushion which retails for $30 and five or six 18″ toss pillows for the back.

As with all of our plans, you are building at your own risk and you should have a firm understanding of building in general before you attempt many of our plans (some are easy as pie and perfect for beginners). With that, go forth, have fun, take lots of pictures and share them in a showcase or on social media with the hashtag #builtTDCtuff and we will share our faves! Be sure to tag @thedesignconfidential on Instagram / FB and @thedesconf on Twitter / Pinterest.

The Design Confidential DIY Furniture Plans How to Build an Aegean Outdoor Sofa
$75-$125
The Design Confidential DIY Furniture Plans How to Build an Aegean Outdoor Sofa
  • 9 – 2×4 at 8’
  • 3 – 1×4 at 8’
  • 2 – 2×4 at 26” – End Tops
  • 4 – 2×4 at 19” – End Bottoms and End Middles
  • 4 – 2×4 at 21” – End Backs and End Fronts
  • 5 – 2×4 at 88” – Front Bottom, Back Bottom, and Back Slats
  • 1 – 2×4 (ripped down to 2-3/4”) at 88” – Seat Support
  • 1 – 2×4 at 6” – Seat Support Leg
  • 10 – 1×4 at 23” – Seat Slats

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Cut the pieces for the End Fronts, End Backs, End Tops, End Bottoms, and End Middles. With the Kreg jig set for 1-1/2” material, drill pocket holes in both ends of the End Middles and End Bottoms and in the top ends of the End Fronts and End Backs. Assemble as shown with glue and 2-1/2” pocket screws. Repeat this step twice – making the Ends mirror each other with pocket holes facing the inside – once for each end of the Sofa.

Cut the pieces for the Back Bottom and the Front Bottom. With the Kreg jig set for 1-1/2” material, drill pocket holes in both ends of the Back Bottom and the Front Bottom. Assemble as shown with glue and 2-1/2” pocket screws.

Cut the pieces for the Back Slats. With the Kreg jig set for 1-1/2” material, drill pocket holes in both ends of the Back Slats. Assemble as shown with glue and 2-1/2” pocket screws.

Cut the piece for the Seat Support and the Seat Support Leg. With the Kreg jig set for 1-1/2” material, drill pocket holes in both ends of the Seat Support and in the top end of the Seat Support Leg. Assemble as shown with glue and 2-1/2” pocket screws.

Cut the pieces for the Seat Slats. With the Kreg jig set for 3/4” material, drill pocket holes in both ends of the Seat Slats. Assemble as shown with glue and 1-1/4” pocket screws.

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

// Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you ONLY use 1 image and provide an ADEQUATE link back to the original source and appropriate plan! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential. By accessing or using any part of the web site, you agree to become bound by the terms and conditions of this website as outlined under Terms of Use. If you do not agree to all the terms and conditions of this agreement, then you may not access the Website or use any services. The information contained in this website is for general information purposes only. The information is provided by The Design Confidential.com and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, personal injury or death, or any loss or damage whatsoever arising from loss of information or profits arising out of, or in connection with, the use of this website. I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it. The Design Confidential.com is inspired by but does not replicate exact designs, any similarities between these plans and items sold at specialty retailers is coincidential and not endorsed by or related to any said retailers. // Post May Contain Affiliate Links

Showcase

Builders Showcase // Rustic Outdoor Table with Built In Drink Cooler

05.26.15

My wife wanted to be able to have chairs on the ends so I extended the top by 14″ over the frame. We also wanted to be able to cover the gutter so we used $10 plastic planter boxes and I cut a 2×6 to drop into the gap. There is a 2″ hole towards the center to be able to pull the lids off. We did the entire thing in cedar, then finished in linseed oil. Since this will be out in the elements, we wanted to prolong its life. 🙂

$250 including lumber, planter boxes and weather resistant screws

2 afternoons

Made out of cedar instead of fir

Extended the table top for additional seating

Change gutter to planter boxes

8 2x6s at 8′

8 2x4s at 8′

Linseed oil

Plans

Free DIY Furniture Plans // How to Build an Indoor / Outdoor Mid Century Plant Stand

05.22.15
You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build an Indoor / Outdoor Plant Stand via @thedesconf

It’s as easy as 1, 2, 3! The sleek design is perfect to display your potted house plants or garden beauties… and so easy and inexpensive that you could build several in a single afternoon. Play around with paint colors and plant stand heights on this build – you’ve got the time!

As with all of our plans, you are building at your own risk and you should have a firm understanding of building in general before you attempt many of our plans (some are easy as pie and perfect for beginners). With that, go forth, have fun, take lots of pictures and share them in a showcase on the site or on social media with the hashtag #builtTDCtuff and we will share our faves! Be sure to tag @thedesignconfidential on Instagram / FB and @thedesconf on Twitter / Pinterest. If you are a blogger and you post about your build, don’t forget to include a link to your post on your showcase here. Don’t forget… for all of our newer plans, clicking on the images will let them expand to enormous sizes with much greater clarity. The older plans may need updating so please let us know if you need one fixed!

You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build an Indoor / Outdoor Plant Stand via @thedesconf
$15-$25
You Can Build This! Easy DIY Furniture Plans from The Design Confidential with Complete Instructions on How to Build an Indoor / Outdoor Plant Stand via @thedesconf
  • 1 – 1×2 at 8’ (you will only need approximately 2’ total)
  • 1 – 1” Wooden Dowel at 8’
  • 1 – 1/4” Wooden Dowel at 1’ (you will only need 6” total)
  • 2 – 1×2 at 6-1/2” – Short Centers
  • 1 – 1×2 at 7-1/4” – Long Center
  • 3 – 1” diameter Wooden Dowel at 30” – Legs
  • 6 – 1/4” diameter Wooden Dowel at 1” – Pins

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Cut the pieces for the Short Centers and the Long Center. With the Kreg jig set for 3/4” material, drill pocket holes on the long sides of the Short Centers – these angled ends will attach to the Long Center. Assemble as shown with glue and 1-1/4” Pocket Hole Screws.

On the outer ends of the Short Centers and Long Center, drill two 1/4” diameter holes 1/2” deep as shown. Use a drill stop for a more precise drill depth. After drilling each hole, drop a dab of Wood Glue into each hole and insert a 1” long 1/4” diameter Pin into each hole.

Cut the pieces for the Legs. Drill two 1/4” diameter holes 1/2” deep as shown. Use a drill stop for a more precise drill depth.

After drilling the holes into the Legs, drop a dab of Wood Glue into each hole. Attach the Short Centers and Long Center to the Legs as shown by inserting the Pins, already glued into the Centers, into the holes in the Legs. Wood putty or caulk can be applied to the small gap on each side of the 1x2s that attach to the Leg if a smoother looking joint is desired.

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

// Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you ONLY use 1 image and provide an ADEQUATE link back to the original source and appropriate plan! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential. By accessing or using any part of the web site, you agree to become bound by the terms and conditions of this website as outlined under Terms of Use. If you do not agree to all the terms and conditions of this agreement, then you may not access the Website or use any services. The information contained in this website is for general information purposes only. The information is provided by The Design Confidential.com and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, personal injury or death, or any loss or damage whatsoever arising from loss of information or profits arising out of, or in connection with, the use of this website. I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it. The Design Confidential.com is inspired by but does not replicate exact designs, any similarities between these plans and items sold at specialty retailers is coincidental and not endorsed by or related to any said retailers. // Affiliate links are used for tools and materials. The Design Confidential will earn a small commission for any items purchased using these links. Thank you for your support – every little bit counts!