Plans

Free DIY Furniture Plans to Build a $10 DIY Kids Here There Anywhere Play Table

08.22.11
Project Image

There is something about miniaturized furniture that is just so adorable. Rather than give you plans for a basic square table, which I am fairly certain many of you might be able to figure out on your own, I thought I might share Construction Plans for this fabulous table with splayed legs, inspired by, Land of Nod's Here There Anywhere Table (allegedly).

Estimated Cost 

Under $25

Dimensions 
Dimensions for This Project

Tools 
  • Tape Measure
  • Square
  • Sander
  • Drill
  • Saw
  • Kreg Jig – Optional
Lumber 
  • 5 – 1×3 at 8' – you can elect to use 1×6's (2 at 8', 1 at 6') or ply/mdf for table top (27 1/2 x 27 1/2″) if you prefer, in which case you will only need 1 – 1 x3 at 10' 2 – 2×3 at 8'
Materials 
  • 1 1/4″ Pocket Hole Screws – if using a Kreg Jig
  • 2″ Wood Screws
  • Wood Glue
  • Wood Filler
  • Sandpaper
  • Finishing Supplies
Cut List 
  • 3 – 1×3 at 22 1/2″ (Frame)
  • 2 – 1×3 at 21” (Frame)
  • 11 – 1×3 at 27 1/2″ (Table Top)
  • 4 – 2×3 at 25” (Legs) – ** you will cut these down with a miter saw, but this measurement gives you room for error.
  • 2 – 2×3 at 20″ (Aprons) – ** you will cut these to size with a miter saw, but this measurement gives you room for error.
Instructions 

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Step 1

Step 1 

Build your frame. Use your pocket holes system to join the boards and place them on the rails (green) on the inside portion of each rail so they remain hidden. Set your system for 3/4″ stock and use 1 1/4″ Pocket Hole Screws and glue. If you aren't using a Pocket Holes System, use 2″ Screws from the outside of the Stiles (wood colored). You should also create the pocket holes for attaching the table top, while you are still at this stage, if you are using a Pocket Hole jig.

Step 2

Step 2 

Cut your legs slightly longer than you will actually need. Miter one side at a 4° angle and align with the frame (upside down) along the side on one of the outside rails (green in the image above). The angled cut you just made will sit flush with the frame top and outside edges. While holding your leg as indicated, measure from the ground up, perpendicular to the ground, and up to 22 3/4″ and mark that place on your leg. This marker is the indicator of where you will cut your next 4° angle while keeping your table at an overall height of 23″ after you attach the table top. Your legs should be somewhere in the ballpark of 23 1/16″ in length after you miter both top and bottom. Fasten Legs in place from the inside of the Frame using 2″ Screws and glue.

Step 3

Step 3 

Cut your aprons to size, as indicated below. Rather than working from my measurements, you should measure to fit your table. Use my measurements below as approximates to guide you. This will be cut at an angle on both sides and it will be easiest to determine your exact angles if you measure the space between the legs at the very top, just under where your table top will sit (19″ is what mine happens to be, the table top is shown here even though you haven't attached yours yet) and at the very top of the leg/frame joint. Then measure the space between the legs at the 2 1/2″ (perpendicular) marker from the first measurement location (mine worked out to 19 1/2″). Connect the dots between those to dimensions, mark out your angle, and cut. Fasten with 2″ Screws and glue, from the inside of the frame.

Step 4

Step 4 

Fasten your table top as shown. It will be a 27 1/2″ square and should be centered on the frame. Use your 1 1/4″ pocket hole screws from underneath or fasten with 2″ Screws from the top, use glue, and be sure to countersink so that no screws protrude onto the play area of the table.

Finishing Instructions 

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

**Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you provide an adequate link back to the appropriate post! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.

Home / Shopping

Bring Your Own Baggu

08.22.11

Project Image

I would like to begin this post by telling you all how much I adore things in come in a rainbow of color options and are organized by color.  I have a major affinity for the marker, pencil or paint aisle in the craft store because they are ordered by color.  I hate to mess up a brand new box of crayons because their order is perfection, and I just love to look at it!  When I stumbled across this site, I was instantly in love!  Not only do they come in a rainbow variety, they are enormous, high quality bags and will help save more dolphins and sea life from dying of plastic contamination in our oceans (have you seen those terrible images, terrible).  Now my feeling on the whole…bring your own grocery bags to the store idea…is that they are never large enough, and honestly I would need 800 in order to truly avoid using the provided paper or plastic.  That my friends is a decent investment…800 bring your own bags…eek!

Do take the time to check out this site because I am really not joking when I say these bags are HUGE!  HUGE!  They are made from durable material, come in EVERY color your little heart might possibly desire and are cool looking enough, that I am considering using a few as my fall lineup of purses/totes.  They also fold up into small zippered pouches so you will always have them with you and they are under $10 a piece.  The more you buy, the cheaper they become, and with their serious enormity of size, you will likely only need 3-4 to cover all of your shopping needs!  Did I mention they are machine washable?  Can we say kid proof?  Heck they are large enough I just may put my kid inside while I shop! HA…Done and Done…

and I am in love… with the Baggu Bag

Plans

Free Woodworking Plans to Build the Spice Cabinet Drawers and Door

08.21.11
Project Image

This set of plans covers 3 individual pull out drawers and an overlay door for the Spice Cabinet. The instructions indicate how to construct a door if you don't have a table saw or router. This can be modified for any door style that use an inset panels and solid wood facing.

Estimated Cost 

$25-$50

Tools 
  • Tape Measure
  • Square
  • Sander
  • Drill
  • Saw
  • Kreg Jig
Lumber 
  • 1/2 sheet – 1/2” plywood – will be visible on door panel but not for drawer bottoms. You can purchase 2 varieties and a 1/4 sheet for each, one can be a lower grade for the drawer bottoms, and the other should match your solid wood boards.
  • 2 – 1×3 at 6'
  • 1 – 1×3 at 8'
  • 1 – 1×3 at 10'
  • 1 – 1×4 at 6'
Materials 
  • 6 pair of 22″ full extension side mount drawer slides with a 1/2″ clearance
  • 1 1/4″ Pocket Hole Screws
  • 1″ Pocket Hole Screws
  • 1 1/4″ Wood Screws
  • Wood Glue
  • Wood Filler
  • Sandpaper
  • Finishing Supplies
Cut List 
  • 3 – 1/2” ply at 21 1/2”x 6 3/4″ (drawer bottoms)
  • 1 – 1/2” ply at 21 3/4” x 4 3/4” (inset door panel)
  • 6 – 1×3 at 22 1/4” (drawer sides)
  • 3 – 1×3 at 6 3/4” (drawer back)
  • 6 – 1×3 at 23 1/4″ (drawer guides)
  • 2 – 1×3 at 26 3/4” (door stiles)
  • 2 – 1×3 at 4 3/4” (door rails)
  • 3 – 1×4 at 8 3/4″ (drawer fronts
Instructions 

This cabinet making technique is one meant for folks who don’t own table saws or routers. If you do happen to own a table saw, you are welcome to make this in a more traditional sense and simply use the measurements provided to aid you. I am going to provide a plan for a single multi-level drawer pull out for this cabinet as well, stay tuned for those plans

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Step 1

Step 1 

Build your drawers as shown below. Use your pocket holes system to join the drawer panels and place them on the back side of the back panel, the under side of the bottom and on the inside of the drawer sides near the front to fasten your drawer front in place. Set your system for 3/4″ stock on the drawer sides and 1/2″ stock for the bottom.

Step 2

Step 2 

Cut your drawer guides to size. Install your drawer slides on the guides and the drawer itself. Then attach the drawer guides to the inside of the cabinet unit as indicated below. If you would like to adjust the spacing between drawers, be sure you adjust the spacing between drawer guides as well. I have indicated the guides to be cut to the same dimensions as the inside of the cabinet so that fastening them in place and making sure they are level is a bit easier.

Step 3

Step 3 

Cut your door pieces to size, as indicated below.

Step 4

Step 4 

Fasten your door pieces using your pocket hole system. The frame will use a 3/4″ setting for creating your pocket holes, and the insert will need a 1/2″ setting. Place the pocket holes as indicated below.

Finishing Instructions 

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

**Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you provide an adequate link back to the appropriate post! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.

Design

Vintage Inspired and Whimsical Childrens Rooms

08.19.11
Project Image

There is something magical about a touch of vintage in a child’s room. A bit of nostalgia to instill a love of the past, a romanticism for discovery, of life and culture unique to our own, or perhaps to connect with our roots.

I am completely smitten with antique beds that appear to pull out for a wider version. A new spin on a lifetime bed to be sure…

Design / Home / Shopping

Brass Tacks and Riding Boots

08.19.11

Project Image

Inspired by Fashion…translated into fabulous decor.

Sources 

Sourced: 1.  Perhaps the coolest pair of Riding Boots I have seen in a while.  A trend I hope doesn't leave us too quickly.. 2.  Eames Chair, speaks for itself… 3.  Etirement Lamp by Remi Bouhaniche reminds me of a French Bombe (French term for a riding hat because of the shape) 4.  Black & Brass Candelabra, little bit rustic, little bit refined, whole lotta cool. 5.  Handmade Scarf, reminds me of a bridle and would be fabulous paired with a simple tank or peaking out from under a fitted blazer (with riding boots, of course).  6. Clock with a decidedly retro feel and yet a very modern appearance. 7.  Field Notes notebook for the stylish jotting down of thoughts.  8.  Collection of Jane Austen's works in Black & Brass hardcover.  9.  Vintage Desk Lamp, well oxidized and fabulous.  10. Brass Watch that I will likely be purchasing for myself in the near future.  11.  Vintage Shipping Box, if this could be translated into a trunk or a bag of some sort, it would be amazing as an fashion accessory, but I will settle for an antique to display any day of the week, this one takes the cake.  12.  Vice Grip Bookends, yes very cool, that Restoration Hardware is really making it's way in the world of fabulous things these days…

Plans

Free Furniture Plans to Build a Wood Barn and Silo Bookshelf

08.18.11
You Can Build This! The Design Confidential DIY Furniture Plan to Build a Barn Silo Bookshelf

A Doll house for boys? Well, not exactly… but kind of? It's no secret to most of us who are moms to boys that boys like play houses just as much as girls do, in fact some of them don't mind dolls either…assuming of course those dolls make good crash test dummies…as is the case for my boy!

I designed this piece with boys in mind, but truthfully I think there are many girls who will like this just as much. So let's call this a gender neutral Wood Barn and Silo Doll House Bookshelf. That's a mouth full, isn't it?

Estimated Cost 

$25-$50

Dimensions 
You Can Build This! The Design Confidential DIY Furniture Plan to Build a Barn Silo Bookshelf

Tools 

TOOLS + MATERIALS //

Lumber 
  • 3/4 Sheet of 1/4″ Plywood
  • 1 – 1×12 at 10'
  • 2 – 1×12 at 8'
  • 1 – 1×3 at 6'
Cut List 
  • 1 – 1×12 at 49 1/2″ Silo
  • 2 – 1×12 at 41 1/2″ Barn Walls
  • 4 – 1×12 at 28 1/4″ Shelves
  • 2 – 1×12 at 12″ Dividers
  • 4 – 1×12 at 10 1/2″ Silo Corner Shelves
  • 2 – 1×3 at 28 1/4″ Footboards
  • 1 – 1/4″ ply at 10 1/4″ x 29 3/4″ Front Fascia
  • 2 – 1/4″ ply at 11 1/2″ x 11 1/2″ Center Roof Panels
  • 2 – 1/4″ ply at 11 1/2″ x 7″ Lower Roof Panels
  • 1 – 1/4″ ply at 29″ x 50″ Back Panel
Instructions 

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

You Can Build This! The Design Confidential DIY Furniture Plan to Build a Barn Silo Bookshelf

Step 1 

Cut your Silo to length and carve out a rounded section with a 5 1/2″ radius (height from center of curved to the stopping point for the curved portion). Cut your Barn Walls to length. We are using 1×12's for 90% of this project so it will mainly be a focus on cutting to length…easy peasy right? Attach your Silo to the back of one of your barn walls (can go on either side). The edge of your sil will be flush with the inside edge of the barn wall and will be attached using 2″ wood screws and glue.

You Can Build This! The Design Confidential DIY Furniture Plan to Build a Barn Silo Bookshelf

Step 2 

Fasten your shelves in place. Use a pocket hole system set for 3/4″ stock and 1 1/4″ pocket hole screws on the bottom of each shelf, or a #8 countersink bit and 1 1/2″ wood screws from the outside of the barn walls. Fasten the divider shelves in place also and use the same process as for fastening the horizontal shelves in place. You should have no problem fastening the vertical shelves since they do not rest on top of one another.

You Can Build This! The Design Confidential DIY Furniture Plan to Build a Barn Silo Bookshelf

Step 3 

Fasten your footboard supports in place. Use a #8 countersink bit and 1 1/2″ wood screws from above on the bottom shelf and from the sides of the barn walls.

You Can Build This! The Design Confidential DIY Furniture Plan to Build a Barn Silo Bookshelf

Step 4 

Cut your rounded corner shelves to size at 10 1/2″ along the horizontal length of a 1×12 and then connect 2 sides making an arc. Make one, and then use that as a template for the remaining 3. Fasten in place using 2″ wood screws and be sure to countersink. Cut the Front Fascia for the hay loft section of the barn (yellow) out of 1/4″ plywood. Fasten directly to the barn walls using 7/8″ screws (countersink) or 7/8″ brad nails if you prefer. Cut out a square in the center of your fascia if you like.

You Can Build This! The Design Confidential DIY Furniture Plan to Build a Barn Silo Bookshelf
You Can Build This! The Design Confidential DIY Furniture Plan to Build a Barn Silo Bookshelf

Step 5 

Cut your roof pieces to size as well as your back panel. Use your 7/8″ screws to fasten together or your brad nailer. Note the back panel is one piece, the cut dimensions are indicated below, however you may want to measure and cut as you go to ensure you have a perfect fit with the roof and your front section.

Finishing Instructions 

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

If you enjoyed this post PLEASE STUMBLE IT! Definitely comment below, Share it or Like it, and subscribe to my feed to stay up to date! You can now also: Follow my blog with blog lovin!

**Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you provide an adequate link back to the appropriate post! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.

Plans

Free Woodworking Plans to Build an Open Shelving Wall Cabinet

08.18.11
Project Image

Have you always wanted to have the Kitchen of Your Dreams, but didn't think you could? Too expensive? Not a DIY project you feel comfortable handling? Say no more… On we march through our Dream Kitchen Series with an Open Shelving Wall Cabinet. We will continue with additional wall and base cabinet systems, and a few other specialty items…stay tuned for those.

We have already completed the Base CabinetWall Cabinet and Pantry plans as well as a door and drawer styling for a Farmhouse look. We are on our way now and it won't be long till we have our dream kitchen completed with many options for decorative touches and styles. Pick and choose till your heart's content. This is a standard Wall Cabinet height so it shouldn't be difficult to work into your kitchen in just the way your mind imagines.  This would also be fabulous storage in a home office or any other are you need additional shelving.  Open shelving is fast becoming a staple in kitchen design… I have provided for space at the top of this cabinet to accommodate crown molding should you desire that and given the piece a bit of extra face frame space to account for that.

Estimated Cost 

$25-$50

Tools 
  • Tape Measure
  • Square
  • Sander
  • Drill
  • Saw
  • **Kreg Jig – optional, can be done without…but honestly not sure why you would want to. This tool simplifies the building process exponentially.
  • ** Finish nail gun – optional, but will make the process faster and easier especially if you are working on an entire kitchen!
Lumber 
  • 1/2 sheet- 3/4″ Plywood (a lower grade is fine).
  • 1/2 sheet – 1/2″ Plywood (a lower grade is fine)
  • 1 sheet – 1/4″ Plywood (this will be showing on the sides of outside cabinets).
  • 2 – 1×2 at 8'
  • 1 – 1×3 at 8'
Materials 
  • **Kreg Jig Owners:
  • 1″ Pocket Hole Screws,
  • 1 1/4″ PHS 1 1/4″ Screws (not necessary if you are using Kreg Jig)
  • 5/8″ Screws
  • 2″ Finish Nails
  • 3″ drywall screws or wall dog anchors
  • Wood Glue
  • Wood Filler
  • Sandpaper Finishing Supplies
Cut List 
  • 2 – 1/4″ Ply at 30″ x 11 1/4″ Outside Panels
  • 1 – 1/4″ Ply at 29 1/2″ x 30″ Back
  • 2 – 1/2″ Ply at 1 3/4″ x 10 7/8″ Lower Interior Panels
  • 4 – 1/2″ Ply at 13″ x 10 7/8″ Inside Upper and Middle Interior Panels
  • 3 – 3/4″ Ply at 10 7/8″ x 29 1/2″ Bottom, Middle, Top Shelves
  • 2 – 1×2 at 29 1/2″ Cleats
  • 2 – 1×2 at 30″ Sides of Face Frame (Stiles)
  • 1 – 1×2 at 27″ Middle Face Frame Rail
  • 2 – 1×3 at 27″ Top and Bottom Face Frame Rails
Instructions 

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Step 1

Step 1 

Cut your Side Panels to size as indicated in the diagram below.

Step 2

Step 2 

We will begin constructing the interior panels: I have made this so easy for you in the way I have designed this. You don't need a table saw to create Dadoes, or a stopper on your drill for Shelf Bracket holes…it's just plain easy. Cut your interior panel pieces to size (this will be mirrored on the opposite side) and attach as outlined to the outside panels. Use 5/8″ Screws to fasten panels together. **If you aren't using a Kreg Jig to construct this cabinet, you should skip to the next step prior to attaching the outside panels to the interior panels. Attach your cleats to the interior panels first then fasten the interior and outside panels together.

Step 3

Step 3 

Attach the cleats to the interior panels. This is how you will ultimately attach your cabinet to the wall using your dry wall screws. Use your Kreg set for 1/2″ stock and your 1″ PHS. If you aren't using a Kreg Jig, you will complete this step prior to fastening the interior panels to the outside panels.

Step 4

Step 4 

Attach the Top, Bottom, and Middle Shelves using your Kreg Jig set for 1/2″ stock and your 1″ PHS. Fasten the back panel to the side panels and shelves. Use 1″ brad nails or 5/8″ Screws.

Step 5

Step 5 

Create your Face Frame: use your Kreg Jig set for 3/4″ stock and use your 1 1/4″ PHS. Place your pocket holes on the rails (horizontal pieces). Fasten to your cabinet using 2″ finish nails and glue.

Finishing Instructions 

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

**Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you provide an adequate link back to the appropriate post! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.

Design / Home

A Paperless Home and The Tea Towel

08.18.11

Project Image

We are about as close to being a Paperless Home as the phrase can actually describe. I always wonder how they factor in Toilet Paper since bidets are not exactly the standard here in the US, though perhaps this is something we should improve upon?

We don't use Paper Towels in our home anymore, at all, we don't even buy them. This was an item I used to use for…well, everything…I couldn't even think about the idea of not using them for fear my life would cease to exist as I knew it. Once that became an item I couldn't afford to buy, since I would have been sacrificing food and diapers, I was surprised at how easy it was to go without them. Now looking back, I am aware at how dependent upon them I was, but I can't hardly remember exactly what I used them for or needed them for. Apparently old habits die much more easily than we think! No point in going back to an expensive habit that has no real use or benefit.

Given the lack of paper toweling in my home, you can imagine how excited I am that Tea Towels have made a very grand entrance in the world of decor. What fun it makes the idea of no longer using paper towels! Perhaps the Tea Towel has something in common with my insane obsession with throw pillows and fabric…not sure…but with options like these below, who cares!

Plans

Free DIY Plans to Build a Simple Cube Shelf

08.17.11
Project Image

This is a very simple step-by step- for creating these stylish and affordable display shelves. These can be used to display just about anything, and they are perfect for those areas needing a little extra something. Ideal for nurseries and kiddo rooms, where shelving and display are a hot commodity, and without taking up surface space or square footage and might otherwise present a potential safety issue. They can display keepsakes, books, or any other special items you wish. Arrange a few in a guest bathroom, possibly even as a fabulous way to add shelving above a toilet area, without having to purchase a large unit…add extra towels, rolled for easy access, and display some bath salts, and sea sponges, to give yourself a spa like retreat. I think if these were painted in a few different colors or one bold color choice, they would become fabulous wall decor, for any room in the house, while also providing functionality.

Estimated Cost 

Under $25

Tools 
  • **If you have your local hardware store cut your wood or MDF to size, you will only need a drill or your Kreg Jig for this project.
  • Tape Measure
  • Square
  • Sander
  • Drill
  • Saw
  • ** Kreg jig – optional and can be constructed without this, but you will have stronger more well disguised attachments if you use this.
Lumber 
  • The materials below will allow for 3 shelves at 3' in length.
  • 3 – 1×4 Wood or MDF at 10' 
Materials 
  • **1 1/4″ Pocket Hole Screws (Kreg Owners Only, you won't need the 2″ screws listed below)
  • 3″ Drywall or Wall Dog Screws
  • 2″ Construction Screws if using wood and 2″ Dry Wall or Coarse Thread Screws for MDF
  • Wood Filler
  • Wood Glue
  • Sanding Supplies
  • Finishing Supplies
Cut List 
  • 3 Shelves:
  • 6 – 1×4 at 36″ (Front and Back)
  • 3 – 1×4 at 34 1/2″ (Base)
  • 6 – 1×4 at 3 1/2″ (Sides)
Instructions 

Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.

Step 1

Step 1 

Fasten the Front and Back to the Base. The base will sit inside of the front and back panels, use 2″ Screws or your Kreg Jig set for 3/4″.

Step 2

Step 2 

Attach the Sides, use 2″ Screws or your Pocket Hole System and be sure to counter sink for regular screws and for Kreg Owners you will place your pocket holes on what will be the inside of the sides.

Step 3

Step 3 

Fill any screws holes, sand, and finish as desired. To secure to wall, use 3″ Dry Wall Screws Anchor Screws and attach to a stud. Most studs are 16″ OC (on center, which means from the center of a stud to the center of the next stud) from each other. This should allow you to secure to at least 2 studs per shelf. Stagger your shelves for an asymmetrical look or stack them for added visual affect. Paint a bold color and add a bit of fun to any wall space.

Finishing Instructions 

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School

**Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you provide an adequate link back to the appropriate post! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.

Design

Dress Your Nest with a Boyish Blend

08.17.11
Project Image

We are ready to Dress our Nest!  Since we have already chosen fabrics options while strolling down the aisles of online fabric stores and we began our search for inspiration, textiles and possible color palettes in Part 1 of this series, we were able to choose a crib style and color in Part 2 of this series, after putting together some possible fabric swatch color palette inspiration boards from our fabric adventures in Part 1.  With Part 1 and 2 behind us, we had a solid foundation building and could appropriately consider choosing a paint color in Part 3 a basic color palette for this room, and were then able to decide on a paint choice in Part 3.

This stage is the portion of design that is truly the most fun!  We will be dressing our nest, our baby bird nest to be exact, and choosing from accessories and gear that are eco-friendly, stylish and perhaps even accidentally cause a little learning or growth to occur (oops, hate it when that happens).  Every item will coordinate with one or more of the color palettes we have been working from and they are such that you can pick and choose whichever you like best and you won’t have to worry about whether or not it “goes” with the room.  Mix and match till your heart’s content or draw inspiration from some of the design plans and resources I am providing.  Good design is all about creating a space that represents you, your family, your lifestyle, and your loves.  You will feel comfortable and relaxed if you design your space using items that you enjoy and find beautiful, above and beyond simply accommodating for the intended functionality of the room.

We will begin with the boyish blend color palette and expand into the girly palette with a pinkish persuasion and continue on our way to the gender neutral color palette.

I will use many of the same accessories in each of the plans to show you just how easy it is to work within your chosen design plan and color palette, regardless of the whether or not their are accessories you have your heart set on or if you have existing pieces that you might need to work into your design plan, Whether for cost savings or sentimental value, existing pieces have one commonality and that is that they do not come in the perfectly coordinated hue you would have chosen.  Not to worry, you can make it work.  Given the flexibility of the color palettes that work with these accessories, you also have the option to keep these items for later use even in another room with a different color palette, and may even allow you to keep some of these pieces as your child transitions into a more grown up space or decides he suddenly loves red and orange and hates blue and green.

To shop this look,click here

Aside from purchasing furniture, it’s the accessorizing that can put you over the limit of your financial edge. It is easy to let those little numbers add up. With a few helpful hints and some fabulous options you should be able to stay within budget and still achieve your dream nursery while maintaining a healthy and environmentally conscious space for your little one.

Dress Your Nest:

It’s true that eco-friendly options can occasionally be more expensive, and that not every company has been able to lower the cost of production given the more strenuous or less available means of manufacturing and obviously isn’t able to pass such savings on to all of us..yet…

In good time this won’t likely be an issue. Hopefully this happens sooner rather than later as far as I am concerned.

1. Keep in mind, that all of those adorable outfits, toys and baby gear that you must purchase or have been given, are often beautiful enough or well designed and can absolutely take center stage in your nursery decor. Choose items for your registry or for purchase that continue the color palette you have chosen for your room. Chances are you love the same colors for both clothing and diaper caddies.

2. Buy or make only a few decorative items that have big impact rather than big ticket prices. You have enough to think about with the impending 18 clothing changes throughout the day, thanks to the spit up (among other things), oh the dreaded spit up…ugh. Items like decorative alphabet cards are perfect for use as art in addition to displaying something educational, and they come in most adorable and beautiful designs. Toys and activities for your child will take up enough space as it stands, you may as well use them as colorful decor for your room in a non-traditional take on accessorizing. Arrange them for ease of use, obviously, but also try and arrange them with a pleasing color balance and proportion or according to a wonderful and appropriate use of scale for a given area of your room. You should probably steer clear of placing the 6 foot stuffed bear, given to you by your mother in law, on top of a medium sized shelving unit or in a place that makes moving around the room inconvenient. Color balance may very well be one of the most prominent aspects of design, in determining whether the space is viewed as pleasing or not. Place your colors (items) by arranging them in such a way as to not provide too much or too little of any one color in a particular area. If you have 4 red objects, 2 yellow objects, 3 blue objects, and an orange object or two… you can spread them around the room and give each important area some of the benefit of that color. If your room has a shelving unit, dresser, side tables and a sitting area for nursing or reading bedtime stories you can place one red item in each of those areas. If you have an uneven number of items for a particular color, you can simply celebrate that by pairing them well. 2 of the 3 blue in this instance, can be place near 2 of the 4 red items. Then you can place one blue with a yellow and add a yellow to a red. Bring in and ground your orange by adding it to either the least prominent area of your space( least prominent perhaps based on a lack of color saturation or location) or the area the red and perhaps alongside another color like second yellow instead of placing that yellow with the red, or place the darn thing with a red and let them add drama to your space.

3. Consider a mobile that hangs from the ceiling, and make it a major decorative component in the room. You can purchase picture hanging mobiles that are very light weight and safe. Attach alphabet or black and white picture and word cards and watch your child learn and absorb. If your child is anything like mine, they will figure out how to pull a crib attached mobile down within the first couple of months, ceiling hung and light weight is a fabulous alternative to keep them safe and will cost half the price of a traditional mobile.

4. Build your own floating shelves to display your child’s first books and special plush toys. This will act as wall decor, cost very little, will be easy to build, and are safe option for your child since they are out of reach from climbing and being pulled over on top of themselves.

This design plan was created using the New Neutral Color Palette and the boyish blend color scheme outlined in Part 1 of the Eco-Chic Nursery for Less series. I have chosen a series of furniture items that will work with all of the color scheme options we have covered, and will work with many more I imagine, and it isn’t specific to this design plan. I began this project using and suggesting fabric swatches as a starting point and to begin to formulate a color palette. I hope to show you the transformative nature of fabric and pattern, and to promote the idea of choosing furniture colors and styles that can be used with many color schemes, just in case you change your mind, or would like to update at any point.

Sources

To shop this look,click here