Originally, I planned to use readily available Sunbrella cushions from Lowe’s that were 25″ square and around $90 for the sofas and chair. Unfortunately, they were back ordered so I found a guy on Etsy who custom manufactures cushions near me and only cost a bit more. Overall the dimensions of the sofas are 82″ wide and 32″ deep and 28″ tall. I made the arms a bit taller as I am 6’5″ and wanted the back cushions to have a little more support. The fire table is 50″ by 30″ with a 30″ by 10″ fire pan and burner inside. The burner and pan was purchased on Amazon and I isolated it from the cedar base by using metal L brackets and U-shaped aluminum channels over the L-brackets (U-side down). The burner pan sits on top of the U-channels which are a little over 30″ apart and in the center of the table. The marble is calacatta gold but looks more like carrara. The fire glass is from allfireglass, a retailer on Ebay. The wood was finished with Sikkens Cetol CRD, which is a marine grade finish designed to keep the cedar looking like new without the typical gray-silver weathering that occurs after a couple years.